Transcript Our presentation (pps 13MB)

www.messer.com.pl
MESSER is a polish manufacturing company. It has been founded in
Warsaw (Poland), 1995.
Since 1999 the only company activity are the projects and the
manufacturing of the units for remote objects monitoring
- by the radio connection mainly.
Company offers their own complete monitoring system basing at the
modern radio data transmit protocol (MESSER-3000).
Moreover, in our offer we also have devices compatible with radio
systems of other known and popular manufacturers.
These are the transmitters as well as repeaters and the base radio
monitoring stations.
Since 2005 company began manufacturing of monitoring devices using
phone and Internet lines.
CERTIFICATES
All of our devices are produced basing on the technical requirements of the European Union (СЕ).
Please notice that our equipment is compliant with the RTTE-ETSI requirements
(technical radio parameters specification).
According to its high demands, we have no problem with certification of our products in countries,
which do not use European standards. Trying to accomodate to our customers requirements, we
offer the software and manuals in three languages: Polish, English and Russian.
Our systems are installed and successfully working in many EU and CIS countries, as i.a.
Lithuania, Ukraine, Georgia, Azerbaijan, Moldova and Russian Federation and many others.
On our clients’ demand, we are able to make any language version.
RADIO SYSTEMS
We offer devices compatible with the following systems:
-
MESSER-Plus and MESSER 3000 – our own systems
-
VISONIC* MILCOL* D and V32 – systems of VISONIC LТD company
-
LARS* and LARS 1 – systems of KP-Systems company
-
INFORMER 12000* – system of C&K* company
-
And others, accordingly to request...
-
* used descriptions are registered names or trademarks used to specify the products only
RADIO DEVICES
We can provide each Security Agency
with the set of devices being the full
complete needed for its operating:
-
RMV-2003/x - Basic Monitoring Stations
-
RPT-2003/x – Long range repeaters
-
UNR-01/x – Radio transmitters
-
Messer Monitor software
Monitoring stations
RMV-2003/x
General features:
-
3 housing designs: RAK-19”, MINI-19cm or PC-BOX
Compatibility with radio protocols: Messer UFR-M and M3000, Lars,
Lars1, MilcolD 3+1 and 4+2 (Visonic 32b)
-
Measurement of the radio signal digital quality (BER)
-
Two-way communication with repeaters
-
Optional communication with remote repeaters over GPRS link!
-
Received messages buffer (up to 16 384 records)
-
2 RS-232 ports:
-
-
For communication with various software (many popular wire protocols)
For communication with printer (e.g. EPSON LX 300+)
Technical specifications:
-
4 alarm outputs activated by received messages
-
2 alarm inputs activated by various external devices
-
Buffered power supply with 12V/7Ah rechargeable battery
-
Signals’ compatibility with Motorola GM-340 transceiver
Repeaters
RPT-2003/x
General features:
-
Compatibility with radio protocols: Messer UFR-M and M3000, Lars,
Lars1, MilcolD 3+1 and 4+2 (Visonic 32b)
Measurement of the radio signal digital quality (BER)
-
Retransmitted signals’ confirmation
-
Received messages buffer (up to 8191 records)
-
Transmitting of supervisory messages
-
Optional communication with monitoring station over GPRS link!
-
Repeater power supply status reporting
-
Simple configuration through RS-232 port (Windows Hyperterminal)
-
Technical specifications:
-
Single tamper input
Metal housing for wall mounting
-
Signal level compatibility with Motorola GM-340 transceivers
-
TRANSMITTERS
We are offering three different variants of these devices:
Transmitters with Alarm Panel and LCD keypad
- UNR 01 VHF/ RA 816
Transmitters with DTMF decoders
- UNR- 01 UHF/ DTMF
Standard transmitters (8 inputs)
- UNR-01 UHF
Standard transmitters
UNR 01 - VHF
General features:
-
Simple parameters’ programming through RS-232 port (frequency, report
codes, etc.)
-
Two objects’ numbers service*
Operating with two monitoring stations *
Operating at two programmable frequencies*
Simple alarm panel (arming with f.ex. remote controller) option*
-
Technical specifications:
-
8 NO/NC programmable inputs
On/off input for built-in alarm panel*
Alarm output for siren control*
External battery charging circuit (no need any additional power supply)
Two internal inputs for battery and transformer’s voltage monitoring
Output for powering PIR sensors*
High frequency stability in wide temperature range
Programmable frequency synthesizer
-
VHF (137174MHz) or UHF (420  470МHz) frequency range;
-
* features specific for MESSER’s production transceivers only!
Transceivers with
DTMF communicator
UNR 01 - VHF
General features:
-
Simple programming through RS-232 port of all parameters (frequency,
report codes, etc.)
-
Two objects’ numbers service*
Operating with two monitoring stations *
Operating at two programmable frequencies*
Serial data receiving from any alarm panel equipped with the phone
communicator and Ademco** DTMF 4+2 (Ademco Express) protocol;
hardware Watch-dog circuit;
-
Technical specifications:
-
8 NO/NC programmable inputs
DTMF interface module
External battery charging circuit (no need any additional power supply)
Two internal inputs for battery and transformer’s voltage monitoring,
-
High frequency stability in wide temperature range
Programmable frequency synthesizer
-
VHF (137174MHz) or UHF (420 470МHz) frequency range;
-
* features specific for MESSER’s production transceivers only!
* Ademco is registered name of Ademco Co.
Transceivers with
alarm panel and LCD keypads
Radio ALERT 816
LINES’ FEATURES:

8 inputs for PIR sensors on the main board

Additional 8 inputs on extension module

2 independent partitions (zones)
Line programming options:
- N.O. or N.C. line
- 24 hour line
- Silent or loud line (siren activation)
- Bypassed line
- Excluded line
- Separate or common line for partition
- Night line (Stay)
- Delayed input/output line (0-99sec).
- Line alarm counter

OUTPUT FEATURES:

1 siren control output (PGM 150 mA)

4 outputs on extension module

1 output for PIR sensors powering (300 mA)
EVENTS MEMORY:

99 latest events
SYSTEM COUNTERS

Programmable exit time (0-99 sec)

Programmable entry time (0-99 sec)

Programmable siren time (5-99 sec)
Transceivers with
alarm panel and LCD keypads
Radio ALERT 816
USER OPTIONS:
-
6 User codes (4-8 digits)
1 Master code
-
1 Installer code for alarm panel keypad programming
-
1 Administrator code for PC programming
Users have a ability to:
Arm/Disarm system or partition
-
Arm system into Night mode
-
Bypass alarm lines
-
Activate keypad alarms: Police / Fire / Medical
-
Change user codes (master code)
-
Make periodical siren test
-
Activate door lock (simple access control)
PROGRAMMING METHODS:
KEYPAD OPTIONS:
-
Maximum no. of keypads: 4 with connection msupervisor
Keypads are addressable separately for each partition
-
Alarm panel programming and User control
-
User options: keypad only
Monitoring center settings: PC software only
-
Alarm panel settings: PC software and keypad
-
All programmings protected with passwords
MONITORING SYSTEM
MESSER 3000
Radio protocol parameters
Messer-3000
MESSER-3000 ENCRYPTION PROTOCOL :
In comparison to other formats, UFR-M3000 distinguishes itself i.e. with very short transmission time.
This feature enables handling a large number of objects numbers (transceivers) operating at one frequency channel.
Advanced method of radio encryption and CRC coded protocol with an autocorrect function allow for a very high
receiving efficiency.
RADIO TRANSMISSION PARAMETERS
OBJECT NUMBER:
8191
NETWORK CODE NUMBER (STATION ID):
16
REPORT CODE NUMBER:
256 (00-FF)
TRANSMITT TIME:
~650 ms
Radio system
assembling schematics
Messer-3000
Network construction example
Messer-3000
Multifrequency network
Messer-3000
Working on single frequency
Working with two frequencies
Multifrequency network
Messer-3000
Working with 3 frequencies
Example of addressing
network devices
Messer-3000
Retransmitters connected to
Station Receiver
over GSM network with
Station receives using Internet (option1)
Operating Computer
RS 232- 1
Et erne t c ard
RS 232- 2
RS 232- sla ve
RS 232- mas ter
Coded signals from
Remote Repeaters
Radio & GPRS
Monitoring Station
Decoded signals
to PC Software
Coded signals
from Repeaters
RS 232- 1
I nter net
(Const ant IP)
In ternet
(Co nsta nt IP)
Har dwa re Conv erte r
Eth ern et --> Rs23 2
- Alar m S oft wa re
Coded signals
from Repeaters
Radio & GPRS
Monitoring Station
RS 232- sla ve
RS 232- mas ter
GPR S
pho ne t ransmit ter
wit h RS 232 inp ut
(an y AP N)
RS 232
Repeater sending messages to the Station
through Internet or GPRS
Radio & GPRS Repeater
OR
Coded signals
from Repeaters
Decoded signals
to PC Software
RS 232- 1
Decoded signals
to PC Software
Operating Computer
- Ala r m S oft ware
- Eth e rne t > Rs2 32 c on vert er
- Ala rm S oft ware
RS 232- mas ter
Signals receiving using GSM/GPRS (option3)
Station receives using Internet (option2)
Operating Computer
GPR S ph one rec eiv er
wi th R s232 ou tpu t
(pri vate AP N)
Rad io & GPRS
Monitorin g Station
RS 232- sla ve
Coded signals
to Remote Station
In tern et
Har dwa re Conv erte r
RS2 32 --> Eth erne t
GPRS
OTHER DEVICES
of MESSER COMPANY
Telephone monitoring
station
RMT-2003/x
General features:
-
2 housing designs: MINI-19cm or PC-BOX
-
Protocol compatibility: Ademco DTMF 4+2 and Contact ID
-
Telephone lines’ efficiency control
-
Inoperational or „blind” transmissions monitoring
-
Supply voltage control
-
Received messages buffer (up to 16 384 messages)
-
RS-232 port for PC software communication (many different protocols)
Technical specifications:
-
Simultaneous handling fo up to 4 telephone lines (separate processors)
-
Compatibility with telephone lines in different international standards
-
Robust protection against overvoltage on telephone line
GPRS technology
for alarm systems
monitoring
Manufacturing plans for year 2010 cover developement of
the GSM/GPRS devices:
-
Object communicators (transceivers) – GPRS – with alarm panel and LCD keypad.
Mobile GPRS transmitters with GPS system positioning.
Software
All of our stations
are equipped with
various protocols
for communication
with any software
available in the
market that can be
used for monitoring
station control,
according to the
operator’s fancy,
e.g. SIMS, SIS,
Alarm Center, SMS,
etc.
But if you do not have the software to operate with our station, we can provide You with Messer Monitor
software, created especially on our demand. The software is available in 3 languages: English, Russian,
Polish. Other language options also available on special demand.
www.messer.com.pl