Transcript GQ40C GQ50C

• THE GQ40C / GQ50C IS A FULLY AUTOMATIC REBAR CUTTING
MACHINE.
• THIS CUTTER USES A UNIQUE SHEAR CUTTING MECHANISM THAT
HELPS IT CUT REBARS OF ALL SHAPES AND SIZES.
• THE BLADES USED IN THIS MACHINE CUT THROUGH THE REBAR
WITH ONE STRIKE, THUS EXACT PRECISION OF CUTTING IS
ACHIEVED WITH EVERY CUT.
• THE CUTTER CAN GIVE 36 CUTS PER MINUTE . EVEN IF 1/3rd OF THIS
TARGET IS ACHIEVED, WE CAN GET 12 CUTS IN 1MINUTE, IMAGINE
THE AMOUNT OF CUTTING WORK THAT CAN BE FINISHED IN A DAY !
1. ROUND STEEL, FLAT STEEL, SQUARE STEEL AND EVEN ANGLE
STEEL BARS CAN BE BENDED WITH MINIMUM EFFORT.
2. IT CAN BE USED CONTINUOUSLY FOR HOURS TOGETHER UNLIKE
ANY OF THE DISC CUTTERS.
3. STUPENDOUSLY FAST SPEED OF WORK IS ACHIEVED THUS
REDUCING THE OVERHEAD COSTS IMMENSELY.
4. IT HAS A CLOSED LUBRICATING STRUCTURE, MAKING THE
OPERATION AND MAINTENANCE EXTREMELY EASY & FEASABLE.
5. THE COST OF MAINTANCE AND OVERHEAD EXPENSES REDUCE
CONSIDERABLY ONCE THE REBARS ARE CUT SWIFTLY.
6. THE SCRAP METAL LEFT OUT BY THIS MACHINE GIVES A
BEFITTING RESALE VALUE.
ON THE TRADITIONAL DISC CUTTER MACHINES
Disc cutters
use at least
100 discs
per month
So you
spend Rs.
6000 every
month!
Minimum
cost for 1
disc is
Rs.60
Rs. 6000
PER
MONTH
12
MONTHS
Rs.76000/FOR JUST
DISCS!!
OVER THE YEAR ..
THE DISC CUTTER COSTS YOU MORE THAN Rs.
81,000/-
ON THE OTHER HAND…..
THE BLADES OF OUR AUTOMATIC BAR CUTTING
MACHINE LAS UPTO 22,000 CUTS ON AN AVERAGE
ALONG WITH GIVNG YOU UNMATCHED SPEED !!
THUS, THE GQ40 & GQ50 ARE EFFICIENT, FAST AND
MUCH MORE ECONOMICAL THAN ANY OTHER
CUTTER.
Model
GQ40C
GQ50C
δ B≤ 450 mpa
Ø 6~40
Ø 6~50
δ B≤ 510 mpa
Ø 6~28
Ø 6~40
δ B≤ 570 mpa
Ø 6~25
Ø 6~35
Times of Cutting per Minute
36
29
Stroke of Blade (mm)
34
44
Space of Blades (mm)
35~42
44~54
3
4
2880
2890
380, 3-phase
380, 3-phase
1080x433x795
1240x550x1160
560
820
Diameter of
(mm)
Power (KW)
Speed (r.p.m)
Voltage (V)
Overall Size (LxWxH) (mm)
Weight (Kg)
All the specifications above is only for reference, which will be changed without
notice
• THE GW40 / GW50 IS THE ULTIMATE BENDING MACHINE WHICH
ALLOWS YOU TO BEND REBARS OF VARIOUS SHAPES AND SIZES.
• PIN POINT PRECISION IN THE DEGREE OF BENDING CAN BE ACHIEVED
IN EVERY BEND, MOREOVER IT CONQUERS THE SHORT COMINGS OF
THE BEND ANGLE ERROR.
• 3 TO 4 REBARS OF SMALL SIZES CAN BE BENT AT THE SAME TIME AT
THE SAME DEGREE.
• BENDING CAN BE DONE FOR ANY ANGLE REQUIRED AND PERFECTLY
SYNCHRONISED RINGS CAN BE MADE.
THE GW40/GW50 GIVES YOU THE UNIQUE OPTION OF BENDING BARS
IN 3 AMAZING WAYS:
1. MANUAL: This method allows you to control the angle of bending by the
push of a button, thus you can bend each bar at a different angle every
time.
2. SEMI-AUTOMATIC: Using this option allows you to set the angle of
bending before hand. Once the angle is achieved, the machine
automatically cuts off and returns to original position. The bar can simply be
taken out and another bar can be set in. The machine starts to bend the
next bar only when the button is pushed.
3. FULLY-AUTOMATIC: Bending by this option cuts your work out even more.
Once the bar is automatically bended and the machine has returned to its
original position, the machine waits for a specified amount of time for you to
remove the bent bar and set in a new bar, and then automatically starts
again. The time for this pausing can be adjusted as per requirement. So all
you have to do is set the bar in and out !
SAY BYE BYE !!
• TO LABOUR TROUBLES.
• TO BENDING ANGLE ERRORS.
• IRREGULAR BENDING.
NOW GET YOUR BARS BENDED IN RECORD
TIMINGS AND IMPROVE WORK EFFICIENCY
LIKE NEVER BEFORE!!
Model
Diameter of
(mm)
GW40Z
GW50Z
δ B≤ 450 mpa
Ø 6~40
Ø 6~50
δ B≤ 510 mpa
Ø 6~32
Ø 6~40
δ B≤ 570 mpa
Ø 6~28
Ø 6~35
3.7
Speed of Turning Plate (r.p.m)
7.2
6
14
Power (KW)
3
4
1430
1440
Voltage (V)
380, 3-phase
380, 3-phase
Overall Size (LxWxH) (mm)
774x898x728
900x670x815
448
600
Speed (r.p.m)
Weight (Kg)
All the specifications above is only for reference, which will be changed without
notice