Transcript For Mult-E Kit - Universal Lighting Technologies

Compact Fluorescents
Presented by: Your Name HERE
© 2012 Universal Lighting Technologies
|
1
Fluorescent vs. Incandescent Lamps
Fluorescent lamps provide Energy Efficiency & Longer Life

Before Fluorescent ... Incandescent lamps were the only available electric lighting source, and
they are still common today for a variety of applications. But… Incandescent lamps are not
efficient and don’t last long. The heat that incandescent lamps generate demonstrate their
inefficiencies as lighting sources.
•
Fluorescent lamps are significantly more efficient than incandescent lamps, using less energy
and lasting significantly longer. This efficiency can be measured in terms of Lumens per Watt
(LPW). This is similar to Miles per Gallon with an automobile.
Incandescent
Fluorescent
18 LPW
60-105 LPW
© 2012 Universal Lighting Technologies
750 hrs. life
20,000+ hrs. life
|
2
Fluorescent Lamp Glow
What makes a fluorescent lamp glow?
1.
As an arc current passes through the gas in the fluorescent tube, the electrons flowing from the
electrode at the ends of the lamp collide with the mercury atoms that are in the gases of the lamp.
2.
The impact of the electrons and the mercury atoms produces ultraviolet rays. These ultraviolet rays
strike the phosphors on the glass wall of the lamp, causing them to fluoresce and produce visible light.
© 2012 Universal Lighting Technologies
|
3
Ballast Requirement
Incandescent Lighting does NOT need a Ballast
An incandescent lamp operates directly off the power line. Current flows through the filament,
and the filament glows, providing light. The filament also acts as a resistor to limit the current
passing through it.
120 V
© 2012 Universal Lighting Technologies
|
4
Lamps that need ballasts
Which Lamps Need Ballasts?
All arc discharge lamps such as fluorescent and high intensity discharge (HID) require
ballasts for proper operation. Without a ballast, these lamps will not work.
Linear Fluorescent
U-Bend
Fluorescent
Circline
Fluorescent
Compact
Fluorescent
HID
Screw-in compact fluorescent lamps include an extremely small ballast built
into the plastic base where the socket is located.
© 2012 Universal Lighting Technologies
|
5
CFL Family: Universal’s Offering
Universal offers broad selection of
electronic Compact Fluorescent ballasts to address
the most commercial applications!!
Mult-E Kit
•CFL Ballast
Replacement Kit
347 V CFL
Models
CFL
Lampholders
•Ideal for down
lights and wall
sconces
•Available in 10packs to add
conveniently to CFL
Replacement Kits
for the Complete
Solution.
CFL for Quad,
Triple, &
Multi Lamp
Applications
•13-70 watt
CFL for Long
Twin T5
Lamps
CFL for 2D
lamps and T5
Circline
•Ideal for track
light surface
mount fixtures
•18, 24/27, 36/39,
40, 50, 55 and 80
watts
•Ideal for surface
mount fixtures
U n i v e r s a l ’s C F L Fa m i l y
© 2012 Universal Lighting Technologies
|
6
CFL Family: Primary Benefits
Triad® Electronic CFL:












High efficiency for maximum energy savings.
Universal input voltage of 120-277V.
 Installer-friendly universal input voltage, which reduces inventory and ensures that
you have the right voltage ballast every time.
Programmed Rapid Starting (PRS) incorporated.
 Increases lamp life for those frequently switched applications where occupancy
sensors are used.
Metal can construction.
 Metal housing construction meets all plenum & construction code requirements.
Delivers maximum heat transfer to extend ballast life.
Meets all applicable regulatory and safety standards.
 Meets ANSI/NEMA requirements.
1- or 2- lamp operation of multiple lamp applications.
 Multiple lamp options on each ballast for added versatility in applications.
Low profile form case fits in any fixture.
 Small size means less wasted space than full alternative.
End of lamp life shutdown circuit.
 Allows you to replace failed lamps without turning off power.
75° C Temperature Test point.
 Maximum Case Temperature of 75° C allows for easy ballast/fixture testing,
assuring proper temperature application.
Lamp proximity.
 Lamps can be mounted in close proximity to these ballasts due to no temperature
critical components near the can sides.
Type CC and Type HL (hazardous locations) rated.
Color coded connectors. Dual entry color coded wire trap terminals make wiring accurate
and installation easy.
© 2012 Universal Lighting Technologies
Backed by Triad®
five year warranty.
|
7
CFL Family: Replacement Kit
Mult-E® Kit CFL Replacement Kit:
 Reduces Inventory. Contractors keep CFLs on their truck for quick and easy
replacements as needed, so talk to them about the convenience of having a
few SKUs cover most applications needed, so less wasted space on truck.
 Versatile mounting. Mult-E kit has a variety of mounting options in just one
kit. Contractors can be sure the CFL ballast replacement kit has everything
they need.
 Multi-Exit lead configuration for use in both side-exit and bottom-exit
replacement applications.
 Saves labor time. Having the right replacement in their truck at the time
they need it saves labor time. ULT CFLs cover most applications with fewer
SKUs.
 Saves replacement time. The programmed rapid start feature increases
lamp life, meaning fewer times up and down the ladder to replace the
lamp.
 Saves installation time - easy. The snap mount adapter plate speeds up
installation time. No hardware is required for attaching the plate.
 Wiring accuracy. Dual entry color coded wire trap terminals make wiring
accurate and installation easy.
 Installer friendly Universal Input voltage ensures that you have the right
voltage ballast.
© 2012 Universal Lighting Technologies
Replaces multiple
SKUs with 1
versatile kit
covering most lamp
applications.
|
8
CFL Family: Replacement Kit
Electronic CFL for Long Twin-Tube Lamps Benefits:
 Smallest cross section available and universal input
voltage.
Electronic CFL for 2D & T5 Circline Lamps Benefits:
 Unique solutions. Connectors for side and bottom
exits reduce shadowing and provide maximum heat
dissipation away from the sensitive electronic
components.
© 2012 Universal Lighting Technologies
|
9
CFL Family: Complete Solution for Contractor
Mult-E Kit + CFL Lampholders = The Complete Solution
CFL Lampholder Benefits:
 Packaged in convenient 10-pack size. Perfect to
add to CFL Replacement Kit for the complete CFL
solution.
 Casing: Polycarbonate or PBT GF high-heat resistant
material.
 Push-in terminals for 18AWG solid or solder-dipped
stranded cable. Unique twist and lock G24q series.
 Made of high-temp resistant polymer. The fatigueresistant stainless steel clip support springs for
secure lamp fit.
 Various mounting styles including snap-in and
push-fit version for secure fast assembly
 cUL listed
© 2012 Universal Lighting Technologies
|
10
CFL Family: Applications
Target Segments
Just about every industrial,
institutional or commercial space
needs replacement CFL ballasts.
 Retail

Ggeneral shopping floor space, restrooms, recessed down
lights, outdoor fixtures, track light, etc.
 Healthcare

Patient rooms, hallways, restrooms, dining area, etc.
 Education
The Mult-E kit message (e.g. labor
saving, one SKU covers all, and no
matter what the situation in the
ceiling we’ve got you covered) is
particularly appealing to property
managers, lighting maintenance
contractors, and commercial
maintenance contractors.

Classrooms, labs, gymnasiums, restrooms, cafeteria, etc.
 Hospitality

Atriums, corridors, elevators, vandal-resistant fixtures,
hallways, lobby, ballrooms, conf. rooms, guest rooms,
decorative, wall sconce, ceiling fixtures, outdoor fixtures,
etc.
 Commercial development and Office Buildings

Office enclosed, office cubicles open, restrooms, reception
area, recessed down lights, hallways, etc.
 Religious Institutions/Churches:
CFLs offer long lamp life in
frequently switched applications.

 Restaurants:

© 2012 Universal Lighting Technologies
Recessed down lights, wall sconces, ceiling fixtures,
replacing incandescent, etc.
Ppen spaces, lobbies, restrooms, hallways, track light,
outdoor fixtures, etc.
|
11
CFL Family: Quick Cross Reference
For Mult-E Kit:
Conveniently cross to
Universal CFL ballasts ...
For Triad CFL:
Always consult the current spec sheet for details: http://ultballastspecs.unvlt.com/
© 2012 Universal Lighting Technologies
|
12
CFL Family: Quick Lamp Reference
Quickly identify the ballast
needed based on the
lamp designation ...
© 2012 Universal Lighting Technologies
|
13
For Additional Information, please visit our website www.unvlt.com or
use your QR Reader for Smart Phone instant access.
THANK YOU
Website: www.unvlt.com
Nashville Customer Service: (800) 862-8666
Universal Technical Engineering Services: 1-800-BALLAST (1-800-225-5278)
© 2012 Universal Lighting Technologies
|
14