Transcript Crouzet SSR & IO Presentation

20Amp Solid-State Relay in a 17.5mm Din Rail Mount Package
Lifetime > 5 Million Operations @ Full Load Current
Contactor or Bistable Relay Functions
Quiet Operation
< 5mA Off-State Leakage Current
IP20 “Touch-Safe” Housing
UL, cUL Listed, and CE Compliant
25 or 40 Amp / 240Vac Outputs (50A & 80A Total, Respectively)
Direct Bond Copper Substrate
Random or zero-crossing (synchronous and non-synchronous) output option available
1/4” Quick-Connect Output Terminals
Dielectric withstand ratings (input-to-output) up to 4kVrms
Industry Standard Package
UL / CSA / TUV, and CE Compliant
10, 15, & 30 Amp Ratings @ 50 (60), 100, & 200Vdc Outputs
FET or Economic Transistor Output
10uA Off-State Leakage for Reliable Switching of Sensitive Loads
Standard GN IP00 or IP20 Package
Milliohm On-State Impedance Reduces Total Power Dissipation (FET Output Only)
Input LED Status Indicator
UL / CSA / TUV, and CE Compliant
3 to 5 Amp / 240Vac PC Mount Solid-State Relays
High Current Thyristor for 100A Surge Withstand Capability
<100uA Off-State Leakage for Reliable Switching of Sensitive Loads
Random (GA8 only) or Zero-Crossing Outputs
Industry Standard Sip or Flat-Pack
4KV Optical Isolation (Input to Output)
UL Recognized, CSA Certified, and CE Compliant
Compact Design for Limited Space Applications
12 & 20 Amp Models at 240 / 480Vac
<100uA Off-State Leakage for Reliable Switching of Sensitive Loads
Random or Zero-Crossing Outputs
Cost Effective Triac Output
4KV Optical Isolation (Input to Output)
UL Recognized, CSA Certified, and CE Compliant
10, 25, & 45 Amp / 660Vac 3 Phase Solid-State Relays
25 & 45 Amp / 660Vac Phase Reversing Relay
1200Vpk Off-State blocking Voltage
Random or Zero-Crossing Dual Back-to-Back SCR Outputs
LED Input Status Indicator
4KV Optical Isolation (Input to Output)
UL Recognized, CSA Certified, and CE Compliant
GA0 PHASE REVERSING SSR
• I/O modules are application specific solid
state relays designed to meet the
computerized demands of the industrial
control market.
AC inputs to logic ( yellow case )
DC inputs to logic ( white case )
DC logic to AC ( black case )
DC logic to DC ( red case )
PB-8 WITH STANDARD .6” I/O
• Input modules perform a reverse relay
function by converting either an AC or DC
voltage to a DC logic level signal. By
returning a signal to the microprocessor or
controller, it knows an action has occurred in
the field. Field devices would be limit
switches, thermostats, pressure transducers,
etc.
• Output modules are similar in function to standard
AC and DC solid state relays. Most versions can
handle between 3 and 5 amps.
• While driven from low level logic signals, output
modules are designed to control power to loads
such as motors, heaters and valves and usually
include circuitry for noise rejection and transient
voltage suppression.
Application
Package style
Logic Voltage
Thermal ( ambient temperature )
Load voltage
Load current
• AC modules cannot be tested by placing an ohm meter
across the output and energizing the input
• AC modules should not be wired in parallel with mechanical
switches unless appropriate transient protection is utilized
on the modules output
• DC inductive loads should be diode suppressed
• DC I/O modules should be placed as close as possible to
inductive loads to prevent ringing
• Transient protection is helpful and advisable in any
application with inductive loads
• M or SM modules will fit .6” mounting
boards
• .6” will not fit M or SM mounting boards
• M or SM will not interchange on respective
boards
• SM I/Os have a retaining pin, M modules do
not
• Regulated input voltage on all output modules
– Single version for 5, 15, and 24 volt inputs
• Regulated supply voltage on all input modules
– Single version for 5, 15, and 24 volt outputs
• Half the height of Grayhill 70G series
• Replaceable industry standard fuse
– Opto 22 fuse is not standard
• Fuse replaceable without removing I/O from board
C4 SERIES I/O
• Input and output modules
• Regulated supply current
• Built-in LED status indicator
• Up to 5 amp output
• 4000 VAC optical isolation
• Replaceable industry standard fuse
• UL/cUL Recognized, CE Compliant
• Input and output modules
• Regulated supply current
• Built-in LED status indicator
• 3 Amp outputs
• 4000 VAC optical isolation
• Replaceable Bussman PCE-5 fuse
• UL/cUL Recognized, CE Compliant
STANDARD DIN RAIL I/O
• Input and output modules
• 4 I/O per module
• Built-in LED status indicator
• 3 amp outputs
• 4000 VAC optical isolation
• UL/cUL Recognized, CE Compliant