Transcript Slide 1

Chapter 4 (part 1_a)
Baseband Data Transmission
EKT 357 Digital Communications
Chapter 1 (part 1_a) Overview


Baseband data transmission
Line coding
Baseband Transmission

A sequence of binary digits are to be
transmitted through a baseband channel.

However, no channel can be used for the
transmission of binary digits without first
transforming the digits to waveforms that are
compatible with the channel.

For baseband channels, compatible waveforms
are pulses.
Line Coding

Using Digital Signals to Transmit Digital Data
 Bits must be changed to digital signal for transmission
 Unipolar encoding


Polar encoding


Positive or negative pulse used for zero or one
Uses two voltage levels (+ and - ) for zero or one
Bipolar encoding

+, -, and zero voltage levels are used
Line coding and decoding
4.5
Line Coding

The binary digits with electrical pulses in order to
transmit them through a baseband channel.

Pulse modulation applied to binary symbol, the
resulting binary waveform is called PCM waveform.
(E.g. Line Codes)

Four main groups of line codes
 Non return to zero (NRZ)
 Return to Zero (RZ)
 Phase encoded
 Multilevel binary
Non Return To Zero (NRZ)

NRZ-L



Used extensively in digital logic circuit
Binary 1 one represented by one voltage level
Binary 0 is represented by another voltage level.
Non Return To Zero (NRZ)

NRZ-M




Used in magnetic tape recording.
The 1 (mark) is represented by change in level
The 0 (space) is represented by no change in level
Differential encoding
Non Return To Zero (NRZ)

NRZ-S



Complement of NRZ-M
1 is represented by no change in level
0 is represented by a change in level
Return To Zero (RZ)

Unipolar RZ


1 is represented by a half bit wide pulse.
0 is represented by the absence of pulse.
Return To Zero (RZ)

Bipolar RZ


1 & 0 are represented by opposite level pulses that are one
half bit wide.
Pulse present in each bit interval.
Return To Zero (RZ)

RZ-AMI


1 is represented by equal amplitude alternating pulses.
0 is represented by the absences of pulse.
Phase Encoded

Bi-phase-level @ Manchester coding


1 half-bit-wide pulse positioned during the first
half of the bit interval
0 half-bit-wide pulse positioned during the
second half of the bit interval.
Phase Encoded

Bi-phase-mark



Transition occurs at the beginning of every bit
interval.
1 second transition one half bit interval later
0 no second transition
Phase Encoded

Bi-phase-space



Transition happen on the beginning of every bit
interval.
1no second transition
0 second transition one-half bit interval later.
Phase Encoded

Delay modulation @ Miller coding


1transition of the mid-point of the bit interval.
0 no transition, unless it is followed by another
zero.
Multilevel Binary


Used three levels to encode the binary data.
Dicode and duo binary
Multilevel Binary

Dicode –NRZ



Transition happen on the beginning of every bit
interval.
1 to 0 or 0 to 1 data transition changes the pulse
polarity
without a data transition, the 0 level is sent.
Multilevel Binary

Dicode- RZ



Transition happen on the beginning of every bit
interval.
1 to 0 or 0 to 1 transition produces a half-duration
polarity change;
Otherwise, a 0 level is sent.
NRZ
RZ
Phase
Encoded
Multilevel
Binary