Transcript MINERVA MX TECHNOLOGY - Teknik Elektronik Yangın

tyco MX TECHNOLOGY
MX VIRTUAL
Multi-Sensor Detectors
MX VIRTUAL
Multi-Sensor Detectors

25 Virtual detectors from 2 physical
detectors

Suitable for all fire types

Adapts to changes in a buildings use

Reduces installation & maintenance
costs
tyco MX TECHNOLOGY
MX VIRTUAL Multi-Sensor Detectors
800PH Series
Photo + Heat
800CH Series
CO + Heat
Plus
800H Series Heat only
800I Series Ionisation
tyco MX TECHNOLOGY
MX VIRTUAL
Single Detector Modes
(eg. HPO, Optical, Fixed heat, Compensated CO)
Dual Detector Modes
(eg. HPO and Fixed Heat Detection)
Day/Night Mode switching
(eg. ROR in the day, HPO at night)
tyco MX TECHNOLOGY
MX VIRTUAL Detector Key Features





Low cost
Environment friendly
Self verification for remote
maintenance
Use existing low profile
bases
Optional isolator with
every detector
tyco MX TECHNOLOGY
MX VIRTUAL Detector Key Features





Stores service information
Programmable 360º LED
Duct probe options
Temperature indication
CO & Smoke level
indication
tyco MX TECHNOLOGY
MX VIRTUAL Detector Key Features

Easy to install (no address key)

Sounder (801SB) base
Relay (801RB) base
Isolator (801IB) base



Detector & functional base
separately identifiable, but only
1 address
801PH - LPCB Approvals
Optical
FASTLOGIC 3 Sensitivities
Standard
2 Sensitivities
Heat
A1R
A2S
Heat enhanced optical (HPO)
FASTLOGIC 3 Sensitivities (Default)
Standard
2 Sensitivities
Combinations
Optical + A2S
3 Sensitivities
Enhanced optical + A2S 3 Sensitivities
801CH - LPCB Approvals
Carbon Monoxide
2 Sensitivities
Heat
A1R 1 Sensitivity
A2S 1 Sensitivity
Heat enhanced CO (CCO)
2 Sensitivities
Combinations
CCO + A1R 1 Sensitivity (Default)
801H - LPCB
Elements
Heat
Operating Modes
A1R
A2S
CR
Sensitivities
1
1
1
801I - LPCB
Elements
Operating Modes
Ionisation
Threshold level
Sensitivities
3
OTHER DETECTORS

Flame detectors

S271F +
Beam detectors
 ASD detectors
 Linear Heat detectors

LD40 (Cable)
 MXF100 Minerva Fireline (FibreOptic)


Intrinsically Safe
Ph1 M300Ex
 Ph2 800Ex

tyco MX TECHNOLOGY
MX Loop Ancillaries

MX Loop Ancillaries are designed for
flexible wiring configurations.
Faster installation
Faster commissioning
Meet customer requirements

Circuit styles are described using the
NFPA 72 descriptions for initiating
circuits and notification circuits.
Core Ancillaries
MIM800 - Mini-Input Monitored
 CIM800 - Contact Input Module
 DIM800 - Detector Input Monitor
 SNM800 - Sounder/Notification Module
 RIM800 - Relay Interface Module
 APM800 - Power Supply Monitor
 Call Points / Pull Stations
 Audio Amplifier - phase 2

Non-Addressable Devices

SB520 - Sounder/Notification Booster
Used in conjunction with SNM800
 Increases DC Sounder Capacity to 10 Amps
 As used on Minerva / TFX


HVR800 - High Voltage, Self powered,
Interposing, Relay
120/240 VAC, @ 10A, 1 Form C Contact
 No Supervision
 Compatible with standard tyco MX relay Modules

General Features
250 A Average Standby Current Draw
 Device Address Programming Concept

The ancillary can be programmed after the
device has been fastened to the electrical
junction box
 The ancillary can be programmed after the
device has been wired into the loop.
 Connect a three pin cable from the device
programmer to a header on the ancillary.

tyco MX TECHNOLOGY
MX Loop Ancillaries and Detectors

Designed for flexible wiring configurations.
Faster installation
Faster commissioning
Meet customer requirements
Loop powered modules.
 Easy and flexible programming.
 Easily maintained and tested.
