Transcript Pserc Wisc Edu Seminars EDSA University EDSA U

POWER ANALYTICS
EDSA U: Grooming Tomorrow’s Power Systems Engineers
Copyright © 2007 EDSA Micro Corporation
EDSA U’s Mission
POWER ANALYTICS
Provide a tool for power systems education in Universities
• Demand for electrical power is already at an all-time high, and is
growing at an increasing rate
• Power infrastructure is not keeping pace with demand, either in
industrialized countries (in which existing infrastructure is overtaxed
and in a state of deterioration) or developing nations (in which
infrastructure either does not exist, or cannot keep up with
burgeoning demand)
• In many countries, power infrastructure was completed without a
vision for modern capacity demands (data centers, call centers,
automated assembly, residential and office equipment, etc.)
• Power systems engineering has lagged other disciplines, but is
expected to be one of the fastest-growing field in the coming years
Copyright © 2007 EDSA Micro Corporation
Introducing EDSA University
POWER ANALYTICS
Dedicated to power systems education
• A Business-University alliance committed to putting the best tools
into the hands of the best instructors
• Combination of distance learning, and on-site education
• Free training in San Diego for participating University professors
• Generous benefits for the University community
- 1) Engineering Students
- 2) Engineering Departments
- 3) Alumni
Copyright © 2007 EDSA Micro Corporation
EDSA U’s Expertise
POWER ANALYTICS
Industry-leading software, instruction, and tutorials for:
• Power Systems Modeling
(using Paladin DesignBase)
• Power Systems Diagnostics
(using Paladin Live)
• Short Circuit
• Fault Analysis
• Arc Flash Simulation
Copyright © 2007 EDSA Micro Corporation
• Power Flow Analysis
• Reliability and Capacity
• Energy Management
• Protection Coordination
• Power Systems Optimization
• Dynamic Behavior Simulation
• Power Quality Analysis (PF
correction, Harmonic Analysis)
Introducing EDSA University
POWER ANALYTICS
Benefits for Engineering Students
• Hands-on experience with the internationally recognized power
systems modeling tool, a tremendous addition to your resume when
job hunting
• Certificate of Completion after completing an EDSA-certified course
• Certificate of Power Systems Excellence from EDSA, if student
successfully passes an on-line skills test administered by EDSA
• Access to interactive training via tutorials, demonstrations
• Post your modeling portfolio before job hunting
• Free use of Paladin DesignBase software while in school
• Participation in Webex training webinars
• Graduation gift: one-year free license of Paladin DesignBase for
professional use
Copyright © 2007 EDSA Micro Corporation
Introducing EDSA University
POWER ANALYTICS
Benefits for Engineering Departments
• Free use of Paladin DesignBase software for class work
• Free use of Paladin DesignBase software for lab work
• Free use of Paladin DesignBase software for research and
development
• Tutorials and demonstrations for classroom use, prepared by EDSA
experts
• Inclusion in Webex “Instruct the Instructors” programs
Copyright © 2007 EDSA Micro Corporation
Introducing EDSA University
Benefits for Alumni
• 20% discount on Paladin DesignBase, when purchased thru
university affinity program
• On-campus power systems workshops
• Continuing education credits through IEEE
• Access to Webex training webinars
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
EDSA University Founder
POWER ANALYTICS
Silviu Darie, PhD, EE, PE
• More than 40 years experience of University-level
power systems instruction; University Vice
Chancellor
• Author of 20 books and more than 100 published
papers on power systems engineering
• More than 100 research projects for industry
applications
• Completed more that 180 electrical power
projects
• 20 prototypes for industrial mass production
• Multiple patents
• Fluent in leading power systems CAD
applications: EDSA, ETAP, PSS/E, PSS/U, EasyPower, DigSILENT, NetPlan, ASPEN, CYME,
SKM, PSCAD/EMTDC
Copyright © 2007 EDSA Micro Corporation
EDSA-U Summary
A win-win for everyone involved
• Students get hands-on experience with the most powerful
power systems modeling platform
• Faculty receive free training in the use of EDSA products, and
free use of our products… as well instructional support from
EDSA
• Alumni receive discounts on EDSA products, when purchased
through a University referral program
• EDSA gains access to new customers and EDSA-trained
engineers for direct or indirect job placement
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
DesignBase Technical Specifics
The following slides provide
technical details about the
DesignBase software suite.
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Conclusion: Top 10 Benefits
POWER ANALYTICS
1.
The industry’s only “deployable” design model (via Paladin Live)
2.
Unprecedented ease-of-use and design efficiency
3.
“Master Model” architecture updates all models automatically
4.
Productivity tools like components libraries, complex components, etc.
5.
Team-based architecture support simultaneous users
6.
Hyperlinking allows connections to other software applications
7.
Data structure analyzer automatically syncs drawings and databases
8.
Automatic error checking isolates and flags potential faults
9.
Third-party compatibility (AutoCAD, Microsoft Office, etc.)
10. Fully-customizable symbols catalog
Copyright © 2007 EDSA Micro Corporation
Competitive Comparison
POWER ANALYTICS
• In side-by-side comparisons, Paladin DesignBase offers vastly
more features and functions than any other power systems modeler
• User can complete more advanced engineering designs, of high
quality, in less time than using competing products
1000
900
800
700
600
500
400
300
200
100
0
EDSA
Copyright © 2007 EDSA Micro Corporation
Vendor
A
Vendor
Vendor
C
Vendor
A
B
Vendor
B
Vendor
C
Integrated Product Family
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase Modeler
The most powerful, proven platform
• Most robust and widely-used
design and simulation platform
• Thousands of pre-defined
intelligent objects; complex
modeling can be done in less
time
• Robust design definition, with
intuitive graphical presentation
• Dozens of specialized
programs available, to simulate
virtually any type of electrical
power condition
• Ensures designs are “Perfect
on Paper”
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase Modeler
Fastest, most accurate modeling environment
•
•
•
•
•
•
•
•
•
Over 6000-component objects database and component library
Autodesk® ActiveShapes® technology
DWG Unplugged™ for reading/writing AutoCAD DWG and
DXF™ files, and DWF Export Kit for Web publishing
Plugs-and-Sockets technology
Intelligent Hyperlinking
Project Cost and BoM Reporting
Heidi® graphics engine
Interactive Shape Editor
VBA 6.2 Embedded for customization
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Integrated Product Family
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Power Flow
• Generator local/remote bus voltage
control
• Four solution techniques: NewtonRaphson, fast de-coupled, hybrid
solution, advanced Gauss Seidel
• Bus types can be defined as
follows: “out of service,” “load,”
“generator,” or “swing bus
• Multiple swing buses/co-generation
units
• Multiple independent islands
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Short Circuit
• Unlimited bus simulation (50,000+)
• Calculates short circuit current
using IEEE and IEC standards
• Supports single-phase and 3phase networks in the same model
• All types of faults: 3P, L-L, L-L-G,
L-G: solid faults or via an fault
impedance
• Integrated Protective Device
Evaluation (PDE) program
• Short circuit current calculation
inside MCC schedule
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Protective Device Coordination
• Fully integrated with electrical oneline diagram
• Works directly on the one-line
diagram or on the user selected
protective path
• Integrated with Power Flow, Short
Circuit program and Motor Dynamic
Starting programs
• Intelligent PDC auto-select engine
• Intelligent search engine that allows
up stream and down stream
protective device coordination
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Arc Flash
• Unlimited bus simulation (50,000+)
• Program fully integrated with
electrical one-line diagram
• Program Fully integrated with EDSA
Protective Device Coordination
(PDC) program
• Flexible selection of buses, directly
on the one-line diagram or text
driven selection
• Arc Flash exposure based on IEEE
1584 and NFPA 70E
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Cable Pulling
• Cable type: single cable, three
cables triangular, three cables
cradled, four cables diamond
• Extensive library: the pulling
compound data, the cable
data/feeder library and the raceway
data. The user may add, modify and
delete entries in the libraries
• Cable data: any size, type, insulation
category, or voltage level can be
entered
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Power Systems Reliability
• Unlimited simulation (50,000+)
• Can consider overlapping
independent outages
• The reliability indices can be
computed using either a single-load
level or a multi-step load duration
curve
• Three power flow techniques can be
used (network transport flow, DC
power flow, and AC power flow)
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Electromagnetic Transient Analysis (EMTAP)
• Unlimited simulation (50,000+)
• Work directly on the one-line
diagram
• All power system components
modeled for power flow, short
circuit, transient stability, etc. are
represented in the analysis
• Initial conditions are automatically
transferred from Power Flow to
EMTAP
• Large power systems can be
modeled without the need to simply
the network
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Cable Ampacity
• Simulation of soil drying out in the
vicinity of energized cables
• Non-isothermal earth surface
• Cables without metallic sheath but
with copper concentric neutral that
can be single or both ends bonded
and grounded
• Cables on riser poles
• Single phase circuits consisting of
one single core cable with
concentric neutral wires or sheath
serving as the return conductor
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Induction Motor Estimation
• Simulation of soil drying out in the
vicinity of energized cables
• Non-isothermal earth surface
• Cables without metallic sheath but
with copper concentric neutral that
can be single or both ends bonded
and grounded
• Cables on riser poles
• Single phase circuits consisting of
one single core cable with
concentric neutral wires or sheath
serving as the return conductor
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Transmission Line Parameters
• One, or more (up to five), three-,
two-, or single-phase circuits on the
same or adjacent right of ways
• Up to 100 physical wires
(conductors)
• Bundling conductors
• Ground wires being either
continuous or segmented
• Power frequencies as well as
higher frequencies
• Untransposed or continuously
transposed circuits
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Advanced Transients
•
•
•
•
•
•
•
•
•
Unlimited bus simulation (50,000+)
Trapezoidal algorithm
Fast and reliable solution technique
No limits on number of dynamic
models in study
Variable integration step
Extensive machine library
Fully-integrated with electrical oneline diagram
Flexible, fast and accurate
Multi-speed induction motor
simulation
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Power Systems Optimization
• Unlimited bus simulation (50,000+)
• Fully integrates with electrical oneline diagram
• Flexible, fast and accurate
• Fast and reliable solution
technique
• Easy to use, user friendly interface
• User-defined objective functions
• User-defined controls applied
• User-defined control settings
• User-defined optimization
constraints;
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Substation Ground Grid
• Rectangular, square or arbitrary
shaped grid
• Parallel or arbitrary oriented run of
conductors
• Equal, irregular conductor spacing
• Multiple layers of earth types (soil,
crushed rock or other material as
the top layer)
• Calculation of tolerable step
voltage and touch voltage on the
basis of the person weighing 50 or
70 kg (110 or 155 lbs)
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Advanced Motor Starting
• Unlimited bus simulation (50,000+)
Individual dynamic motor starting;
simultaneous multi-motor starting
• Four solution techniques: NewtonRaphson, Fast De-coupled, Hybrid
Solution, Advanced Gauss Seidel
• Automatic voltage control:
transformer tap, generator voltage
control, static VAR compensation
• Including or not the power source
impedance
• Motor starting feature based on
IEEE Brown Book
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Paladin DesignBase modules
Voltage Stability
• Unlimited bus simulation (50,000+)
• Fully integrates with Electrical OneLine Diagram
• Fast, reliable solution technique
• Flexible selection of system load
increases
• User defined groups of generation
for dispatch
• Efficient selection of the monitored
quantities
• Comprehensive Plotting facility for
visualization
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Proven in Demanding Applications
Royal Norwegian Navy
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS
Universities Using EDSA Software
Copyright © 2007 EDSA Micro Corporation
POWER ANALYTICS