xfp 1-2 loop networkable analogue addressable fire panels

Download Report

Transcript xfp 1-2 loop networkable analogue addressable fire panels

XFP 1-2 LOOP
NETWORKABLE
ANALOGUE ADDRESSABLE
FIRE PANELS
XFP501E 16 ZONE
1 LOOP FIRE PANEL
 Attractive flush or surface
mountable plastic enclosure
 No bezel required
 Keypad/keyswitch entry
 Optional CFP761 network
communications card
 LPCB certified to EN54-2/4
 Now with an improved user
interface
 Easier-to-install enclosure
includes new lid-base hanging
mechanism & drill centre points
XFP501/502 32 ZONE
1/2 LOOP FIRE PANEL
XFP502 32 ZONE
2 LOOP FIRE PANEL
 Supplied in a metal enclosure
 Optional AFP385 flush bezel
 Optional AFP711 network
communications card
 Keypad/keyswitch entry
 LPCB certified to EN54-2/4
 Now with an improved user
interface
KEY XFP RANGE
FEATURES
 Third-party certified to EN54 parts 2 & 4 by the LPCB
 Compatible with Apollo’s XP95, Discovery and Xplorer protocols
 The ability to connect up to 8 XFP main panels (any variant) onto a
two-wire RS485 network. Alternatively up to 8 XFP repeaters can be
connected to a non-networked XFP panel
 Two independently programmable conventional sounder circuits
 Two programmable inputs
 A fault output relay and three programmable relay outputs with
voltage free changeover contacts
 A selection of zone dependency/coincidence functions (A, B or C).
 A day/night (building occupied/unoccupied) function
 An investigation delay period function
 Individual sensitivity settings for each device
 A phased evacuation facility
 An alarm counter (to meet clause 7.13 of EN54-2)
 Powerful short circuit protected loop drivers, capable of supporting up
to 40 loop powered 10mA sounders
 An integral EN54 switch mode PSU rated @ 185-260V a.c. 50/60Hz
(1.4A on 16 zone, 3A on 32 zone)
 Adjustable contamination levels
 Earth fault monitoring
 Keypad or keyswitch entry to Access Levels 2 and 3
 An easy to read, 80 character back-lit display
 40 characters of custom text per device
 999 event monitoring
 Comprehensive test, maintenance & commissioning functions
(including auto-learn loops, monitor a point, test outputs, one man
walk test & loop continuity test)
 An intuitive upload-download PC program
NETWORKING
FEATURES
 Allows up to eight XFP panels to be interconnected over a two-wire
RS485 network (max. length 1km). Alternatively up to 8 XFP
repeaters can be connected to a non-networked XFP panel
 Any variant of master panel (1 loop 16 zone and 1 or 2 loop 32
zone) can be networked together.
 All master panels can accept faults, fires, disablements and control
actions from other master panels.
 All master panels monitor others for network wiring faults.
 Time and date common to all master panels
 All master panels require a network communications card.
XFP707 PROGRAMMING
SOFTWARE
 Windows 2000/XP/Vista compatible
 Intuitive ‘look and learn’ approach to programming
 Requires a PC with a 9-way serial port
 Kit includes 2m long SAF7070000 programming lead (lead can be
purchased separately)
 Comprehensive ‘Help’ files included in software
 Free software updates available at www.c-tec.co.uk
 Short-form programming/system capability guide included with all
panels
A typical XFP
addressable loop
A typical XFP
network
XFP501E
External View
XFP501E
Internal View
POWER
SUPPLY
PCB
OPTIONAL NETWORK
COMMUNICATION CARD
(mounts at the back of the enclosure)
MAIN CONTROL PCB
XFP501/502
External View
XFP501/502
Internal View
OPTIONAL NETWORK
COMMUNICATION CARD
SWITCH,
INDICATOR &
DISPLAY PCB
MAIN
CONTROL
PCB
POWER SUPPLY
PCB
Access levels
 Access Level One - General User
 Access Level Two - Authorised User
 Access Level Three - Engineer
Access Level 1
General User
 Display gives feedback on current system status
 Priority is always given to the most important event
 Typical conditions are Normal, Fire (inc. 1st-stage), Pre-Alarm
and Fault
Access Level 1
Menu options
Access Level 2
Authorised User
 Passcode or keyswitch protected.
 Makes active the XFP’s SILENCE/RESOUND SOUNDERS, RESET
and INVESTIGATE CONTROLS
 Allows access to the XFP’s authorised user menu options.
Access Level 2
Menu Options
Access Level 3
Engineer
 Passcode or keyswitch protected
 Makes active the XFP’s SILENCE/RESOUND SOUNDERS,
RESET and INVESTIGATE CONTROLS
 Allows access to the XFP’s engineer menu options.
Access Level 3
Menu Options
Programming
Programming
Programming
Programming
CONTACT
DETAILS
CONTEXT PLUS LIMITED
175 Mauldeth Road, Manchester M14 6SG.
Tel: +44 (0) 161 257 2541
Fax: +44 (0) 161 225 8817
E-Mail: [email protected]
Visit our website at www.xportsales.com
© XFP Presentation Rev 3. Although this presentation is current at the time of production, it may be
revised, updated or superseded at a later date. If in doubt, you are advised to check the current
revision number of the presentation by calling our sales desk on +44 (0)1942 322744.