Transcript Embedded Conference Exhibition

New Product Introductions
National Electronics Week
Birmingham, UK - 2011
The very latest Technology .....
• Over 700 products added
online every week!
• Latest Technology…
• Product exclusives…
• New niche manufacturers…
.........We’ve got it First
New Technology Microsite @ farnell.com
New Technology, New Products, New Solutions....
On the stand today…
Covering a broad portfolio of products, we are
showcasing today products from some of our highprofile brands, including, Analog-Devices, Atmel,
Freescale, Microchip, Texas Instruments as
well as some niche and exclusive brands offering
unique products.
Globally Exclusive
XL_STAR 8-Bit MCU Multifunction System
for MC9S08MM128 / MC9S08JM60
Features:
•The XL_STAR offers a complete MCU development
environment
•XL_STAR allows for project development/debugging as
well as demonstrating functionality of a MMA8415
accelerometer
•The tools are supported and maintained by Freescale
Semiconductor
•The complete BOM for XL_STAR is available from Farnell /
element14, ex-stock
•The MC9S08MM128 from Freescale (Farnell SKU code
1862858) offers some industry leading peripheral on-chip
modules, most notably the 16-bit ADC
•As part of the Freescale Flexis family there is a 32-bit pin
compatible MCU available, the MCF51MM128, that can be
used for those applications requiring more processing
performance without the need for a PCB re-design
XL_STAR board is a co-branded multifunction board,
allowing for design and development with Freescale’s 8-Bit
microcontrollers, as well as demonstrating functionality of an
accelerometer
.
SKU: 1864565
Development Kit for K40 / K60 MCU Family
32-bit Kinetis MCUs represent the most scalable portfolio of ARM®
Cortex™-M4 MCUs in the industry. The first phase of the portfolio
consists of five MCU families with over 200 pin-, peripheral- and
software compatible devices with outstanding performance,
memory and feature scalability.
Enabled by innovative 90nm Thin Film Storage (TFS) flash
technology with unique FlexMemory (configurable embedded
EEPROM), Kinetis features the latest low-power innovations and
high performance, high precision mixed-signal capability.
Kinetis MCUs are supported by a market-leading enablement
bundle from Freescale and ARM 3rd party ecosystem partners.
Features:
•
The most scalable portfolio of low-power ARM CortexM4 MCUs available today
•
Innovative 90nm Thin-Film Storage Flash with
FlexMemory™ embedded EEPROM
•
Exceptional mixed-signal integration
•
One of the most comprehensive ARM® enablement
portfolios, including solutions from Freescale as well as
the ARM connected community
SKU: 1843927
Industrial Networking Kit for Cyclone® IV FPGA
The Industrial Communication Board (ICB-HSMC) is designed to
provide common industry standard interfaces for FPGA platforms
that support RS-232, RS-485, and CAN connectivity through a
High-Speed Mezzanine Connector (HSMC). It allows users to
setup a communication network for industrial use through the
industrial standard interfaces on the ICB.
This board features one RS-232 interface, one GPIO interface,
four RS-485 interfaces, two CAN interfaces, and four PIO
interfaces.
The ICB is an ideal addition to the DE2-115 platform for
developing industrial networking solutions on Altera FPGAs.
SKU: 1863349
MachXO Control Development Kit for LCMXO2280
Features:
• Preloaded Control SoC demo
• MachXO LCMXO2280
• Power Manager II ispPAC-POWR1014A
• 2Mbit SPI Flash & 1Mbit SRAM
• I2C temperature sensor
• Current and voltage sensor circuits
• On-board fan
• Interface to 16 x 2 LCD panel *
• SD memory and Compact Flash memory card sockets *
• Audio output channel
• Expansion header for SPI & I2C
• LEDs & switches
• Standard USB cable for device programming and I2C communication
• RS-232/USB & JTAG/USB interface
• 3" x 1" prototyping area
SKU: 1856281
TDKXGS16 XGS Development System for PIC24
Features:
• PIC24 16-bit next generation processor with 256K
FLASH / 16K SRAM running at over 40 MIPS!
• 3.3/5V Dual Supplies
• VGA
• NTSC/PAL with color generation helper hardware
• Micro SD card interface
• Serial port
• ISP and JTAG programming ports
• PS/2 keyboard/mouse port
• Expansion port header exporting numerous I/O, power,
and signal lines for experimentation
• 3.3/5V internally regulated supplies
• Two game controller ports (Nintendo compatible)
SKU:1841434
ATTINY20-EK1 Qtouch Evaluation Kit
The high-performance, low-power Atmel 8-bit AVR RISC-based
microcontroller supported by the ATTINY20-EK1 Touch Kit.
•
•
•
•
•
ATtiny20 allows for One-pin per touch sensor
Requires few external components
Easy to use
Lowest power consumption
Robusr in noise environment
The MCU features include:
•2KB ISP flash memory
•128B SRAM
•12 GPIO lines
•16 general purpose working registers
•8-bit timer/counter with two PWM channels
•16-bit timer/counter with two PWM channels
•Internal and external interrupts
•8-channel 10-bit A/D converter
•Programmable watchdog timer with internal oscillator
•A slave two-wire interface
•Amaster/slave serial peripheral interface
•Internal calibrated oscillator
•4 software selectable power saving modes
•The device operates between 1.8-5.5 volts
SKU: 1841677
Sitara AM3517/05 ARM Cortex-A8 Development Platform
Features:
• Core: 600 MHz Am35X Sitara ARM Cortex-A8 MPU
• 256MB DDR2 SDRAM and 256MB NAND Flash memory
• Open source PCB
• Robust peripherals
• Three power sources (wall adapter, USB and POE)
• 3.3V I/O
• CAN Bus
• On-chip Ethernet
• USB Phy
• Integrated OTG Phy
• JTAG
• Vast library of Operating system (OS)/real-time operating
system (RTOS), codec libraries and demos available
• Code compatibility with TI ARM Cortex-A8 devices
Benefits:
• Provides users with full featured operating systems
and faster user interface transitions
• Allows developers to utilize low cost memories
• Takes advantage of TI's Via Channel™ package
technology to allow a simple 4-layer PCB design that
users can easily reference to reduce PCB costs
• Enables communication with numerous devices and
customization for proprietary interface
• Broad software ecosystem to make designing fast
and simple
• Developers can easily migrate from the CraneBoard
to other platforms with maximum code reuse
SKU: 1855228
Single-Board Computer SBC-I.MX51
Features:
• CPU: i.MX51Multimedia Application Processor incorporating 32 bit
ARM Cortex-A8
• Clock: 800 MHz
• RAM: 512MB DDR2 SDRAM
• FLASH: 2GB NAND Flash
• Video Processing Unit: IPUv3EX Encoding/Decoding of MPEG-4,
H.263, H.264 standards
• Interfaces: 1-Wire, Audio, Camera, CVBS, Ethernet, HDMI, I2C,
JTAG, Keypad, LCD, LEDs, PWM, SD-Card, SPI, 3x UART, 4x USB,
USB-OTG
• Software: Linux
SKU: 1825712
ADIS16400/PCBZ 3-Axis Inertial Sensor Board
Features:
•Tri-axial, digital gyroscope with digital range scaling ±75°/sec,
±150°/sec, ±300°/sec settings
• Tight orthogonal alighment, <0.05°
• Tri-axial, digital accelerometer, ±18 g
• Tri-axial, digital magnetometer, ±2.5 gauss
• Autonomous operation and data collection
• 220 ms start-up time
• 4 ms sleep mode recovery time
• Factory-calibrated sensitivity, bias, and axial alignment
• ADIS16400 calibration temperature: +25°C
• SPI-compatible serial interface
• Embedded temperature sensor
• Programmable operation and control: see data sheet
• Single-supply operation: 4.75 V to 5.25 V
The ADISUSB is a PC-USB evaluation system that enables basic
• 2000 g shock survivability
demonstration of many SPI-output iSensor® products.
• Operating temperature range: −40°C to +105°C
It provides 2mm screw holes for simple attachment, along with all
necessary cabling for connecting these devices to the USB port.
This system provides sensor data on-demand, through the USB,
at read rates up to 900SPS. This system will run on MS
Windows® XP, NT, and 2000.
SKU:1852641
Stellaris® Robotic Evaluation Board (EVALBOT)
The evaluation kit provides a hands-on mini robotic platform
for learning and using the μC/OS-III real-time kernel.
Features:
■ Evaluation board with robotic capabilities
■ Mechanical components assembled by user
■ Stellaris® LM3S9B92 microcontroller
■ MicroSD card connector
■ I2S audio codec with speaker
■ USB Host and Device connectors
■ RJ45 Ethernet connector
■ Bright 96 x 16 blue OLED display
■ On-board In-Circuit Debug Interface (ICDI)
■ Battery power (3 AA batteries) or power through USB
■ Wireless communication expansion port
■ Robot features
Two DC gear-motors provide drive and steering
Opto-sensors detect wheel rotation with 45° resolution
Sensors for "bump" detection
The Stellaris® Robotic Evaluation Board (EVALBOT) is a
robotic evaluation platform for the Stellaris LM3S9B92
microcontroller. The board also uses a range of Texas
Instruments’ analog components for motor drive, power
supply, and communications functions. After a few minutes of
assembly, the EVALBOT’s electronics are ready-to-run.
The EVALBOT is available with a Stellaris-specific version of
μC/OS-III:
The Real-Time Kernel by Jean J. Labrosse. This book
reveals how a real-time kernel works using Micrium’s μC/OSIII and the Stellaris EVALBOT as references. In addition, the
board is also available separately for those who already have
the book.
SKU: 1835850
EVAL-ADE7878EBZ Energy Metering Evaluation Board
Features:
•
Evaluation board designed to be used with
accompanying software to implement a fully functional 3phase energy meter
•
Easy connection of external transducers via screw
terminals
•
Easy modification of signal conditioning components
using PCB sockets LED indicators on the CF1, CF2,
CF3, IRQ0, and IRQ1 logic outputs
•
Optically isolated metering components and USB-based
communication with a PC
•
External voltage reference option available for on-chip
reference evaluation
•
PC COM port-based firmware updates
SKU:1853939
EBK-GS2985-01 Relocker with Equalization Eval Board
Features
• SMPTE 424M, SMPTE 292M and SMPTE 259M-C compliant
• Single supply operation at 3.3V or 2.5V
•180mW typical power consumption (213mW with RCO enabled) at 2.5V
• Supports DVB-ASI at 270Mb/s
• Input signal equalization and output-signal de-emphasis settings to compensate for
board-trace dielectric losses
• 4:1 input multiplexer patented technology
• Choice of dual reclocked data outputs or one reclocked data output and one clock output
• Standard 27MHz crystal
• Cascadable crystal buffer supports multiple reclockers using a single crystal
• Differential inputs and outputs
• 4 wire SPI host interface for device configuration and monitoring
• Standard logic control and status signal levels
• Auto and Manual modes for rate selection
• Standards indication in Auto mode
• Lock Detect Output
• Mute, Bypass and Autobypass functions
• SD/HD indication output to control GS2978 or GS2988 dual slew-rate cable drivers
SKU: 1794193
ADS1146EVM-PDK 16-Bit Delta-Sigma ADC Kit
The ADS1146EVM is an evaluation board for the ADS1146, a 16bit, multi-channel, delta-sigma analogy-to-digital converter
(ADC). The modular EVM uses the ADS1146 and minimal
circuitry to demonstrate functionality for prototyping and part
evaluation. The pins of the ADS1146 are accessible through
various connections on the ADS1146EVM connectors. The EVM
can be plugged into suitable motherboards such as the
ADS1146EVM-PDK to work directly with any personal computer.
Features
•Contains all support circuitry needed for the ADS1146
•±2.5V and +5V power-supply options for ADC
•Voltage reference options: external or on-board
•GPIO access
•Compatible with the TI Modular EVM System
SKU:1812217
XCL206B123-EVB - DC/DC Buck Converter Board
Features:
• The XCL206 series is a synchronous step-down DC/DC converter
which integrates an inductor and a control IC in one tiny package. A
stable power supply with an output current of 600mA is configured using
only two capacitors connected externally.
• Operating voltage range is from 2.0V to 6.0V. Output voltage is
internally set in a range from 0.8V to 4.0V in increments of 0.05V.
• The device is operated by 3.0MHz, and includes 0.42ΩP-channel driver
transistor and 0.52ΩN-channel switching transistor.
• The XCL206 series has automatic PWM/PFM switching control,
allowing fast response, low ripple and high efficiency over the full range
of loads (from light load to heavy load).
• During stand-by, the device is shutdown to reduce current consumption
to as low as 1.0μA or less.
• With the built-in UVLO (Under Voltage Lock Out) function, the internal
driver transistor is forced OFF when input voltage becomes 1.4Vor lower.
• XCL206B series provide short-time turn-on by the soft start function
internally set in 0.25ms (TYP).
• XCL206B integrate CL auto discharge function which enables the
electric charge stored at the output capacitor CL to be discharged via the
internal auto-discharge switch located between the LX and VSS pins.
• When the devices enter stand-by mode, output voltage quickly returns
to the VSS level as a result of this function.
SKU:1846579
IRDC3840 – Synchronous Buck Converter Board
Features:
The IR3840 is a synchronous buck converter, providing a compact,
high performance and flexible solution in a small 5mmx6mm Power
QFN package.
• Programmable soft-start ramp
• Precision 0.7V reference voltage
• Power Good
• Thermal protection
• Programmable switching frequency
• Sequence input
• Enable input,
• Input under-voltage lockout for proper startup, and pre-bias start-up.
An output over-current protection function is implemented by sensing
the voltage developed across the on-resistance of the synchronous
rectifier MOSFET for optimum cost and performance.
SKU: 1833956
EVAL-ADUM3471EBZ Quad-Channel Isolator Board
The EVAL-ADuM3471EBZ demonstrates two separate
applications for the ADuM347x family of quad-channel digital
isolators with integrated transformer drivers. It has two
independent power supply circuits: a double supply and a single
supply. The switching frequency can be set from 200 kHz to
1000 kHz. The board supports a variety of I/O configurations and
multiple transformer options. It is equipped with two ADuM3471
isolators.
Features:
• 2 independent ADuM347x circuits including 2.5 kVrms isolated dc-todc converters
• Single supply
5 V in to 5 V out (regulated)
Reconfigurable to 5 V in to 3.3 V out or 3.3 V in to 3.3 V out
• Double supply
5 V in to 15 V out (regulated) and 7.5 V out (unregulated)
Reconfigurable to 5 V in to 12 V out (regulated) and 6 V out
(unregulated)
• 4 isolated 25 Mbps data channels per ADuM347x circuit
• Footprints for Coilcraft and Halo transformer options
• Multiple switching frequency options
SKU: 1845245
CY8CKIT-006 - PSoC® 3 family KIT
Features:
• Large complex custom LCD with 448 LCD segments
• CapSense buttons
• Accelerometer
• Thermistor
• Buzzer
• Protoheaders
The kit is factory programmed for an out-of-box
demonstration of PSoC's LCD segment drive capability,
along with PSoC's superior ability to integrate high
performance digital and analog peripherals.
SKU:1780584
OM11048 Low-cost Development platform for
32-bit LPC Microcontrollers
LPCXpresso-OM11048 is a new, low-cost development platform available from NXP. It supports NXP's ARM-based LPC
microcontrollers.
The platform is comprised of a simplified Eclipse-based IDE and low-cost target boards which include an attached JTAG
debugger.
Designed for simplicity and ease of use, the LPCXpresso IDE (powered by Code Red) will provide software engineers a
quick and easy way to develop their applications.
LPCXpresso is an end-to-end solution enabling embedded engineers to develop their applications from initial evaluation to
final production
Features:
• Low-cost development tool platform for LPC MCUs
• Eclipse-based IDE
• Low-cost target board
• Integrated JTAG debugger (separate debug probe not required)
• End-to-end solution supports evaluation to production
SKU:1777673
ETRX357-HR – ZIGBEE MODULE
Radio Features
• Based on the Ember EM351 and EM357 single chipZigBeeTM/IEEE802.15.4 solutions
• 2.4GHz ISM Band
• 250kbit/s over the air data rate
• 16 channels (802.15.4 Channel 11 to 26)
• +18dBm output power ( adjustable down to -21dBm)
• High sensitivity of -105dBm typ. @ 1% packet error rate
• RX Current: 28mA, TX Current: approx. 100mA at 18dBm
Module Features
• Small form factor, SMT module 25mm x 19mm
• 2 antenna options: Integrated chip antenna or U.FL coaxial connector
• Industries first ARM® Cortex-M3 based family of ZigBee modules
• Industry standard JTAG Programming and real time network level debugging via the Ember InSightPort
•192kB (ETRX357) and 128kB (ETRX351) flash and 12kbytes of RAM
• Lowest Deep Sleep Current of sub 1uA and multiple sleep modes
• Wide supply voltage range (2.7 to 3.5V)
• Module ships with standard Telegesis AT-style command interface based on the ZigBee PRO feature set
• Can act as an End Device, Router or Coordinator
• 24 general-purpose I/O lines including analogue inputs (all GPIOs of the EM35x are accessible)
• Firmware upgrades via RS232 or over the air (password protected)
• Hardware supported encryption (AES-128)
• CE and FCC compliance, FCC modular approval pending
SKU:1854235
MPP300200SG-01 - MOD, MATCHPORT
B/G PRO 802.11 SERVER
Features:
• Wireless Specifications
Wireless Standards: IEEE 802.11b; 802.11g
Channel Frequency Range: 2.412 – 2.484 GHz
Output Power: 14dBm +2.0dBM/-1.5dBm
Maximum Receive Sensitivity: -91dBm @ 1Mbps
Data Rates With Automatic Fallback: 54Mbps – 1Mbps
Range: Up to 328 feet indoors (100m)
Modulation Techniques: OFDM,DSSS, CCK, DQPSK,
DBPSK,64 QAM, 16 QAM
• Serial Interface
Two Serial Ports
Interface: CMOS 3.3V-level signals, software selectable
Serial Line Formats: 7 or 8 data bits, 1-2 Stop bits
Modem Control: DTR,DCD
Flow Control: XON/XOFF (software), CTS/RTS (hardware)
• Network Interface
Interface: Wireless 802.11b and 802.11g, Ethernet
Protocols Supported: ARP,UDP,TCP,Telnet, ICMP,SNMP,
v2C, DHCP,BOOTP, Auto IP,HTTP,HTTPS,SMTP,TFTP
The Most Secure, Deployment-Ready WiFi Networking
and Web Server Module
MatchPort® b/g Pro is a programmable device
server delivering WiFi network with the
high level of security to any electronic
product. It provides connectivity in the compact, singlesocket form factor as other MatchPort modules,
enabling OEMs to add WiFi or wired Ethernet
networking to their products on
a single PCB design.
SKU:1698241
FT-MOD-4232HUB - MODULE, USB, SERIAL HUB
Features:
• USB 2.0 Hi-Speed compatible
• One standard Type A USB header to connect to the Host
• USB Hi-Speed FT4232H device for USB-Serial/Bitbang communications. Entire USB protocol handled by USB module
• USB 2.0 Hi-Speed hub controller integrated to support up to 3 downstream USB ports
• USB hub controller and FT4232H are USB bus powered – no external power supply needed
• External power input pin available to supply external downstream USB ports.
• Support for USB suspend and resume
• 4 Asynchronous serial interfaces available which include 2 independent MPSSE engines.
• Defaults to 4 RS232 interfaces.
• Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
• Synchronous Serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI and I2C
• One dual-port USB A socket and 0.1” pitch header to support up to 3 downstream USB ports
• Green/Amber status LED for downstream USB port 2&3.
• LED indicating power supply to external downstream USB ports
• Onboard EEPROM 93LC56 for FT4232H configuration
• UHCI / OHCI / EHCI host controller compatible
SKU:1848976