Sales Guide of DES-1210 series - D-Link

Download Report

Transcript Sales Guide of DES-1210 series - D-Link

Sales Guide
DGS-8000 Series
Chassis Switch
D-Link HQ, Feb 2011
D-Link confidential
Contents
Business Challenge
Product Overview
• Hardware Overview
• High Performance and Advanced Switching/Routing Technologies
• Technology Briefing
Target Market
Product Application Guide
Competitive Comparison & Analysis
Business Challenge
Business Challenge
Business Challenge
Minimize Network Downtime
 Business must run continuously
Enhance Network Performance
 Files’ size is getting larger than before (mail’s
attachment and multi-media transmission)
 “Gigabit on client” pushes faster switching in
core network
Increase Network Security
 Against inside and outside threats
Realize Real-time Applications
 IP telephony and Video streaming applications
need faster response and guaranteed “QoS”
level
Protect Return on Investment
 10GE requirement for backbone bandwidth
increase rapidly
 IPv6 application development
Business Challenge
Premium Offerings of DGS-8000 Modular Switch
Maximized Network Uptime
• Redundant H/W design (switch fabric, power, CPU..)
• Resilient switching & routing technologies (VRRP, MSTP..)
Network Performance improvement
• High port density for mission-critical wiring closets, core and distribution network requirements
• Maximum port count (384 GE copper port,192 GE SFP slots, 64 10GE SFP+ slots)
Comprehensive Security
• Network access control
• Denial of service prevention
• CPU protection policy
Application Awareness
• VoIP-enabled network by multi-layer QoS classification and prioritization
• Video-enabled network by advance multicast routing and switching mechanisms
• Flexible deployment by PoE modules
Return on Investment
• Ease of expansion to increase bandwidth and deploy mixed transmission
media network
• Upgradeable to enable new applications / services
• Superior performance at affordable price
• Future-proofing IPv6 features
Business Challenge
Value Proposition
D-Link DGS-8000 series switches deliver resilient, high performance,
multilayer Gigabit and 10Gigabit connectivity, fulfilling the needs of
enterprise, carrier and data center.
“Modular Flexibility” + ”High Density GE/10GE” + “Superior Features”.
Deploy DGS-8000 as
– Core Switch of Medium Enterprise Network
– Distribution Switch of Mid./Large Enterprise Network
Product Overview
Product Overview
DGS-8000 Hardware Overview
 Scalable H/W Architecture
– Flexible modular design
– 6 and 10-slot chassis models
– Switch fabric capacity up to 2.56Tbps (DGS-8010)
 High Resilient H/W Design
– Dual active load-sharing redundant switch fabrics
– 1+1 power redundancy
– Hot-swappable modular design
 Superior Performance
– Gigabit and 10-Gigabit Ethernet
– System performance up to 1,905Mpps (DGS-8010)
 Power over Ethernet (PoE)
– IEEE 802.3af standard PoE (up to 384 ports)
DGS-8006
DGS-8010
Product Overview
DGS-8000 highlights (compared to DES-7200)

DGS-8000 Series is a 1GE/10GE non-blocking forwarding chassis-based switch

New appearance design (1)

Decreased chassis height: DGS-8006 from 21.5U to 21U (compared to DES-7206),
DGS-8010 from 14.5U to 11U (compared to DES-7210)

New Enterprise (E) and Carrier (C) series I/O Modules

New CM engine boards
(2)

DGS-8000-CM1 on DGS-8006 for 80GE bandwidth for each I/O module

DGS-8000-CM2 on DGS-8010 for 80GE bandwidth for each I/O module

New power supply with power monitoring function

New fan supports speed automatic adjustment function

New temperature display and alarm function

New power management and monitoring functions for I/O modules, and permit the
power on/off control for I/O modules

Up to 160Gbps odd-direction bandwidth per slot

Distributed MPLS/VPLS/IPFIX on Enterprise/Carrier I/O modules

Carrier I/O modules support high capacity ACL/Routing table/MAC table
(3)
(4)
Product Overview
DGS-8000 System Capacity (compared with DES-7200)
DGS-8006
DGS-8010
DES-7206
DES07210
Total Open Slots
6
10
6
10
Slots for I/O Modules
4
8
4
8
Slots for Control Modules
2
2
2
2
953Mpps
1.905Gpps
142Mpps
286Mpps
CM1:320G/640Gbps
CM2: 640G/1.28Tbps
CM3:1.28T/2.56Tbps
96G/192Gbps
192Gbps/384Gbps
1.28Tbps
2.56Tbps
0.8Tbps
1.6Tbps
10 Gigabit Ethernet (XFP/SFP+)
32
64
16
32
Gigabit Ethernet (10/100/100M)
192
384
192
384
Gigabit Ethernet (10/100/1000M)
PoE
192
384
192
384
96
192
96
192
PERFORMANCE
Packet Forwarding Rate
Fabric Bandwidth (Single/Dual)
Passive Backplane Capacity
CM1:320G/640Gbps
PORT CAPACITY
Gigabit Ethernet (SFP)
Product Overview
Highly Reliable Hardware Architecture (DGS-8006)
DGS-8006 Rear
DGS-8006 Front
Hot Swappable
I/O Modules (1,2)
Dual Switch Fabrics
Replaceable
FAN Modular
Hot Swappable
I/O Modules (3,4)
1+1 Redundant Power Supplies
Dimension
Height: 486 mm
Width: 436 mm
Depth: 500 mm
Product Overview
High Reliable Hardware Architecture (DGS-8010)
DGS-8010 Front
DGS-8010 Rear
Replaceable FAN
Modular
Eight Hot swappable
I/O Modules
Dual Switch Fabrics
1+1 Redundant Power Supplies
Dimension
Height: 930mm
Width: 437mm
Depth: 450mm
Product Overview
Components of DGS-8000 Series
8000-CM1
•
CPU Module for DGS-8006 & DGS-8010
•
320G Switching Capacity
•
•
•
•
Load sharing and wire-speed performance
Out-of-band management
800MHz CPU
2GB RAM
Coming soon
8000-CM2
•
CPU Module for DGS-8010
•
640G Switching Capacity
•
Load sharing and wire-speed performance
•
Out-of-band Management
•
800MHz CPU
•
2GB RAM
Planning
8000-CM3
•
CPU Module for DGS-8006/DGS-8010
•
1.28T Switching Capacity
•
Load sharing and wire-speed performance
•
Out-of-band Management
•
800MHz CPU
•
2GB RAM
USB port
Console port
10/100M out-of-band MGMT port
Product Overview
Components of DGS-8000 Series (Cont.)
I/O Modules: Enterprise(E) Module
8000-24TC-E
12 10/100/1000 and 12 combo
(10/100/1000 or GE SFP)
8000-24SC-E
12 GE SFP and 12 combo
(10/100/1000 or GE SFP)
8000-48TC-E
44 10/100/1000 and 4 combo
(10/100/1000 or GE SFP)
8000-48PC-E
44 10/100/1000 PoE and 4 combo
(10/100/1000 PoE or GE SFP)
8000-24SC2XG-E
12 GE SFP and 12 combo
(10/100/1000 or GE SFP) and
2 10GE XFP
8000-4XG-E
4-port 10 Gigabit Ethernet (XFP)
Coming soon
8000-8XS-E
8-port 10 Gigabit Ethernet (SFP+)
Product Overview
Components of DGS-8000 Series (Cont.)
I/O Modules: Carrier(C) Module
8000-48TC-C
I/O Modules: DataCenter(D) Module
44 10/100/1000 and 4 combo
(10/100/1000 or GE SFP)
8000-4XG-C
Planning
Coming soon
Coming soon
4-port 10 Gigabit Ethernet (XFP)
8000-16XS-D
16-port 10 Gigabit Ethernet (SFP+)
8000-48XS-D
Planning
48-port 10 Gigabit Ethernet (SFP+)
Planning
8000-8XS-C
Coming soon
8-port 10 Gigabit Ethernet (SFP+)
Coming soon
8000-24SC2XG-C
12 GE SFP and 12 combo
(10/100/1000 or GE SFP) and
2 10GE XFP
8000-4QXS-D
4-port 40 Gigabit Ethernet (QSFP)
Product Overview
Key features of I/O modules
E Modules
C Modules
7200 Modules
(HW: V3)
MAC
32K
512K
32K
IPV4host
LPM
16K
12K
16K
512K
8K
12K
IPV6hots
LPM
8K
6K
8K
256K
4K
6K
IP Multicast / L2
Multicast
4K/1K
4K/1K
2K/1K
ACL (ingress/egress)
2K/4K
2K/256K
1K/4K
WRED
Support
Support
Not support
VRF
2K
2K
64
VLAN translation
16K (8Kin/8Kout)
16K (8Kin/8Kout)
768
MAC
32K
512K
32K
IPV4 host
LPM
16K
12K
16K
512K
8K
12K
IPV6 host
LPM
8K
6K
8K
256K
4K
6K
Product Overview
Components of DGS-8000 Series (Cont.)
Advanced Service Engines
8000-ASE-IPFIX
Advanced Service Engine : IPFIX module*
Planning
Product Overview
Components of DGS-8000 Series (Cont.)
8000-1400AC
AC Power Supply
1400Watt
8000-2000AC
AC Power Supply
2000Watt
8000-1200DC
DC Power Supply
1200Watt
For 1+1 redundancy,
the type of power
supply should be
the same.
You may learn how to propose the power supply for projects by using the
“Power Configuration Tool” on PMD server
Product Overview
Components of DGS-8000 Series (Cont.)
FAN Tray
8006-FAN
8010-FAN
FAN tray with 6 high-speed fans
FAN tray with 6 high-speed fans
Ventilation/Heat Dissipation Solution of the DGS-8006 & DGS-8010
Blue: Air Flow by FAN module
Green: Power Air Flow
Product Overview
Integrated Hardware Redundancy
Hardware Redundancy for most important components
Hot Swappable
I/O Modules(slot 1,2)
Replaceable FAN
Slot1
Slot2
rear
A
BPower Supply (1+1)
X
Control Module (1+1)
Slot3
Slot4
Hot Swappable
I/O Modules(slot 3,4)
Power Supply (1+1)
X
Power Circuit Redundancy
Product Overview
Switching Technology Comparison
Centralized Switching
•
•
•
•
Legacy Catalyst 6500
HP A7500 with SA mudules
Dumb Line Card without capabilities to determine switching path
All traffics MUST be processed by “Control Card”
Switching performance relies on “Control Card”
Packets always be transmitted back and forth between Control Cards and Line Cards
V.S
Distributed Switching
•
•
•
•
Intelligent Line Card with capability to determine switching path
Synchronized switch/route information on Control Card and Line Card
Layer 2/3/4 Local on board switching capability
Fastest forwarding, near zero-wait
Product Overview
Drawback of Centralized Switching
1
All traffics MUST go through
control card even traffic in/out on
the same line card.
Control
Card
2
Route and VLAN forwarding information is
stored in control card.
Before sending packets, dumb line card
needs to ask control card
3
Line Card
Line Card
Ports
Ports
Line Card
Ports
Poor performance is
resulted from waiting
transmit permit while
sending packets
Line Card
Ports
Product Overview
Distributed Switching on DGS-8000
•
Distributed switching architecture
– DGS-8000 consists of chassis, Control Modules, and I/O Modules.
– Control Module and I/O Modules comprise
–
–
ASIC for switching functions
CPU for management and module control
– Synchronized switch/route information on control modules and I/O
modules.
–
Switch/route information on I/O modules is periodically updated from the Control
Module.
– L2/L3/L4 ACL/QoS intelligent switching on I/O modules
– On-board crossbar fabric comes fastest switching performance.
Product Overview
DGS-8000 Switching Architecture
Distributed ASIC + Crossbar Design (Ex: DGS-8006 + 2 x 8000-CM1 + 4 E/C modules)
Control Module (CM1/CM2)
Control Module (CM1/CM2)
(Crossbar Chip)
(Crossbar Chip)
40G
Channel
40G
Channel
40G
Channel
40G
Channel
40G
Channel
40G
Channel
40G
Channel
40G
Channel
Crossbar
ASIC
ASIC
E/C Module
40G
Channel
40G
Channel
40G
Channel
Crossbar
ASIC
ASIC
E/C Module
Intelligent I/O ASIC provides
on-board L2/L3/L4 local switching
40G
Channel
Crossbar
ASIC
ASIC
E/C Module
Scalable by abundant
bandwidth
40G
Channel
Backplane
40G
Channel
Dual active load-sharing CM
40G
Channel
40G
Channel
Crossbar
ASIC
ASIC
E/C Module
Non-blocking on-board
crossbar for local
switching
Product Overview
DGS-8000 Switching Architecture (Highest Performance) *
Distributed ASIC + Crossbar Design (Ex: DGS-8010 + 8000-CM3 x 2 + DataCenter I/O modules x 8)
Control Module (CM3)
Control Module (CM3)
(Crossbar Chip)
(Crossbar Chip)
80G Channel x 8
80G Channel x 8
Backplane
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
80G
80G
Crossbar
ASIC
ASIC
D Module
Product Overview
Future-Proofing Switching Technologies on DGS-8000



Unparalleled performance - on-board local switching
Unparalleled performance - inter-module switching
Optimized traffic flow
Control Module
Control Module
(Crossbar Chip)
(Crossbar Chip)
Backplane
Crossbar
ASIC
ASIC
I/O Module
Ports
Crossbar
ASIC
ASIC
I/O Module
Ports
Crossbar
ASIC
ASIC
I/O Module
Ports
Crossbar
ASIC
ASIC
I/O Module
Ports
Product Overview
Advance Service Engine for Investment Protection




Integrates advanced service (IPFIX) engine
Converging ASIC & NP (Network Processor) technology
Expansibility of future needs
Investment protection
Service
Integration
Control Module
Control Module
(CROSSSBAR Chip)
(CROSSSBAR Chip)
Flexibility
Backplane
CROSSBAR
ASIC
ASIC
I/O Module
CROSSBAR
ASIC
ASIC
I/O Module
CROSSBAR
NP
NP
ASE-IPFIX
CROSSBAR
ASIC
ASIC
I/O Module
Product Overview
Separated channel design for 3 Planes
Control Module
Separated channels and dedicated
bandwidth for 3 planes respectively
 Data Plane Protection
 Management Plane Protection
 Control Plane Protection
Right architecture for highest network
stability
Data Channel
Management Channel
Control Channel
I/O Module
ASE Module
Product Overview
IPv6 to IPv4 – H/W Wire-speed Processing
IPv4 core
IPv4
Network
Network
IPv6
Network
IPv4
IPv6
Network
Data
IPv6
Manual Tunnel
IPv6
6to4Dynamic Tunnel
IPv6 Network
IPv6
ISATAP Tunnel
IPv4
NAT-PAT
IPv6 Network
IPv4 to IPv6 will experience a fairly long time of co-existence
IPv4/IPv6 Dual Support across Nodes
Accomplish Immigration from IPv4 to IPv6 Tunneling
H/W based IPv6
Product Overview
DGS-8000 Hardware Architecture Advantages
Feature
Advantage
On-board intelligent local L2/L3/L4
• Faster switching performance
• Eliminating unnecessary backplane traffic
• Packet-In/Packet-Out directly without Fabrics
wire-speed switching
Distributed crossbar fabric
• Right architecture at reasonable cost
• Lower latency
• High performance
Load sharing Control Module
• Both Control Module actively work together and backup each other
• Better use of capital investment
• Faster network convergence
Various media GE modules
• Higher flexibility for network requirement
• Pay only for port type/performance required
Non-blocking forwarding for each I/O
module *
• Ultra high 160Gbps bandwidth between Control Module and each I/O module
slots. All I/O modules can run non-blocking wire speed.
• Up to 16 10GE ports per slot running at non-blocking rate, helping
enterprises migrate to 10G back bone.*
Robust control plane design
• Right architecture for highest network stability
Future-proofing backplane architecture
• Investment Protection
Product Overview
Comprehensive Enterprise-class Features
DGS-8000 series provides comprehensive and enterprise-class features covering Security,
QoS, Resiliency to enrich your network.
Network Foundation
Multiple-Service

IPv6 Routing (H/W based)

Traffic Classification

BGP4+

Advanced QoS

Policy Based Route


VRRP
Bandwidth Control (minimum
granularity 64Kbps)

OSPF v2/v3


ECMP, WCMP
Hardware Multicast Routing (lower
latency)

ERPS & RERP (Ethernet Ring
Protection Switching ; Rapid Ethernet
Ring Protection 50~200ms
convergence)

PIM-SM, PIM-DM
Security
Access Control
 802.1x Access Control
 MAC Authentication Bypass
 L2/3/4 Advanced ACL’s
Robust Infrastructure
 Anti-DDoS Attack
 Protocol Verification
Traffic Management
 CPP (CPU Protection Policy)
 L3 Protocol Authentication
 Bandwidth Rate Limiting
 Port Mirror / Traffic Redirect
Secure Management
 SNMPv3 Management
 SSH v2 Secure Shell Client
Product Overview
Feature Highlight – CPP
RAM
CPU
Control Plane
CPU Protection
BW
I/O Module
Interface
Data Plane
Benefits: Stability of CPU
Attack
I/O Module
Interface
Product Overview
You Need to Know
Functionalities
 May lack of some xStack feature set (ZD, SIM, WAC, MAC, 802.1X, sFlow ).
 Similar function but with different term (CPP vs Safeguard), & different behavior
 Similar term but with different behavior (IMPB)
 Longer response time for new feature request
User Interface
 Incomplete MIB support currently (future upgradable)
 Web UI support in the future
 Cisco like command, same as DES-7200 , but won’t be 100% the same with DGS-6600
CLI
Product outlook
 Different outlook with existing/future D-Link business switches
Product Application Guide
Product Application Guide
Campus Network
Unique Solution on DV6
Options of core
E2ES, Unified WLAN, NetDefend
Low cost: DGS-6600
HA: DGS-8000
Rich aggregation option
DGS-3120, DGS-34/3620
Rich access option
FE,GE
Unmgm, Smart, Mgm, xStack switches
Rich WLAN option
Standalone/ Unified AP
Wireless Switching
Product Application Guide
Core
Features , Functions,
Scalability
Large LAN
(Fortune 500)
Mid/Large
LAN
Small/Mid
LAN
DGS-8010
 Modular
resiliency
 Fiber
aggregation
 Advance IP route
 953Mpps
throughput
Aggregation
Wiring-closet
DGS-8006
 Modular resiliency
 VRRP, ERPS
 477 Mpps
throughput
DGS-6604
 Function-completed
 GbE/PoE/Secu./QoS
 Investment Protection
DGS-6604
 Modular resiliency
 VRRP, ERPS
 428.57 Mpps
throughput
DGS-3420
 Function-completed
 GbE/PoE/Secu./QoS
 Investment
Protection
DGS-8006
 Modular resiliency
 VRRP, ERPS
 477 Mpps
throughput
DGS-6604
 Modular resiliency
 VRRP, ERPS
 428.57 Mpps
throughput
DGS-3420 L2+ series
 10GE stacking
 Fiber/Copper aggregation
 Static routing
DGS-3620 L3 series
 10GE uplinks
 Fiber/Copper aggregation
 VRRP resiliency
 Advance IP route
DGS-3420, DES-3528/52
 L2/3/4 ACL
 8 priority queues
 Advance security
DGS-3120, DES-3028/52
 L2/3/4 ACL
Advance security
Product Application Guide
DGS-8000 Advantages



HA by dual CPU engines
High performance with advanced distributed switching architecture
Advanced features ( ERPS, IPv6 Routing, BGP, MPLS )
InternetCore Switch
DGS-8006
xStack
Edge
Switches
Building
xStack
Edge
Switches
DGS-8010
10GbE Ring
DGS-8006
Building
Computing Center
xStack
Edge
Switches
DGS-8006
Building