Aggregate Method 1 - Commercial Building Disclosure

Download Report

Transcript Aggregate Method 1 - Commercial Building Disclosure

A National Energy Efficiency Program
Accredited Assessor Training Course
- Lighting
March 2014
2016
Housekeeping
 Duration
 Breaks
 OH&S
 Evacuation
 Turn off mobile phones
Course coverage
1. About CBD Lighting Assessments
2. Understanding the rules
3. The online assessment form via the Assessor Portal
4. Example assessments
5. Assessing your knowledge
Topic 1
About CBD Tenancy Lighting Assessments
What is the CBD program
 The CBD program is the initiative of the Council of
Australian Governments (COAG).
 The program was established under the Building Energy
Efficiency Disclosure Act 2010 and is managed by the
Australian Government Department of the Environment &
Energy
 To promote the disclosure of energy efficiency information
of large Australian office buildings with an outcome of
improving the energy efficiency of these buildings.
Objective of the CBD program
 To disclose consistent and meaningful energy efficiency
information about large office buildings that are for sale or
lease to everyone (buyers, sellers and tenants).
 This information empowers the market with information
that encourages energy efficiency improvements.
 Twin impacts – better price for efficient buildings, and
lower greenhouse gas impacts.
What is Building Energy Efficiency Certificate
 Under the Building Energy Efficiency Disclosure (BEED)
Act 2010
─ A Building Energy Efficiency Certificate (BEEC) is required for sale, lease or
sub-lease office space of 2,000m² or more. This threshold will reduce to
1,000m² on 1 July 2017.
 The BEEC is comprised of three parts
─ Part 1 - A base/whole building NABERS rating
─ Part 2 - A Tenancy Lighting Assessment
─ Energy efficiency guidance for building owners and tenants (now available on
the CBD website).
What is a CBD Tenancy Lighting Assessment?
 An assessment of the energy efficiency of office lighting
systems
─ Lighting power density
 “General lighting system” - primarily open plan office lighting
 Nominal – not the same as BCA Part J6
─ Control capacity
 No judgment on effectiveness
 Doesn’t assess actual consumption
─ What it can do – not how it is currently used
Why have the assessments?
 Provide information to prospective tenants or owners
about the efficiency of the system
─ Effects cost to run of different spaces
─ Effects NABERS Tenancy Energy ratings.
 Provides guidance to owners / tenants to upgrade
inefficient lighting systems
 Leasa App – assisting tenants to choose
energy efficient office space
Guiding principles
 Fair comparison between tenancies
 Robust and repeatable
 Cost effective and timely
Extract from sample BEEC
BEEC – Cover page
 Building details
 Assessor details
 NABERS Rating & comparison
 Lighting Assessment
coverage
 Energy efficiency guidance
location on the website
Extract from sample BEEC
BEEC – Part 1
 NABERS Energy Star Rating
 NABERS Rating scope, area and
hours
 Assessment of building
energy performance
 NABERS Assessor who
conducted the rating
Extract from sample BEEC
BEEC – Part 2
 Assessment of General
Lighting System efficiency
─ Power density
─ Control capacity
 Note: Base building lighting
efficiency covered by NABERS
rating
Extract from sample BEEC
BEEC – Attachment A
 Additional definitions
about the TLA
 This information comes
with all BEECs
Who can do a Tenancy Lighting Assessment
 Accredited CBD assessor
─
Check the CBD website www.cbd.gov.au
 Training requirements
─
Must be a fully accredited NABERS assessor
─
Attend this session and pass the accreditation exam
─
Pass the CBD program module (online via CBD website)
─
Register for the CBD assessor portal (instructions provided by CBD team)
Processes and procedures
 Customer
─ Agree fee for services including possible initial site investigation
─ Obtain required information
 Tenants
─ Negotiate access, ensure all parties are aware that someone will be entering
their offices to assess lighting, sometimes you may need to do it after hours
 Security and OH&S
─ Follow all site and tenant induction and OH&S requirements
─ Have general and site specific safe work methods statements
─ See TLA Rules section 5.2 for more information
Lighting Assessment process
 Site inspection by Accredited Assessor
 Complete the Tenancy Lighting Assessment (TLA)
application on the CBD Assessor Portal
 Submit TLA to CBD team (with or without BEEC
application)
 CBD team conducts a desktop audit of the TLA
application
 CBD team issue a certified TLA
Assessment timing
 Lodge assessment within 4 months of assessment date
(from the first site visit date)
 CBD Service Charter is to process 90% of all applications
within 10 working days but allow a max. of 15 days to
process a TLA application or a max. of 28 days to process
a BEEC application
 Inform clients of processing timeframes as there
is No prioritisation
Record keeping processes
 Retain records for seven years
 Retain primary data from assessment
─ Site photos notes and marked up drawings
─ Leases or contractual agreements used in assessments
 Summary data only is not acceptable
─ Must be sufficient for an assessor / auditor to accurately repeat the
assessment from documentation only
 All evidence needs to be provided to the CBD
administrator upon request
Record keeping processes
 Logical filing of evidence is essential
 Poor documentation is the primary cause for failing audits
 Assessor portal and TLA Rules provide guidance on
documentation requirements
 Lighting assessments can be audited up to seven years
after the BEEC has been issued
Administrative processes
 Submission requirement
─ 4 months from date of first inspection to submission
 Validity of assessment
─ Valid for five years from certification date
─ Assessors will be able to amend existing TLAs with owners permission (TLA
expiry date remains the same i.e. do not receive another 5 years validity)
 Interpretation of rules – CBD administrator
 Dispute resolution
─ With client
─ With CBD administrator
Topic 2
Understanding the TLA rules
Functional spaces
 Break areas to assess into separate functional spaces
 Separate assessment per functional space
 Acceptable names for a functional space when part floor
is selected:
─ Level 1, West Tenancy
─ Level 10, East
 Not acceptable part floor functional space name:
─ 10 or 12.03
─ Open office
─ Suite 103
Functional space area
 Maximum size is the smaller of:
─ Whole tenancy; or
─ Whole floor
 Can define functional spaces to be the same as used for
the NABERS rating
 NLA required for the whole functional space
─ NLA to give perspective but not critical
─ Areas already required for NABERS rating so should be available
Naming functional spaces - example
 This is on level 2 of the
building
 Acceptable use names of:
─ Level 2 Suite 1
─ Level 2 Suite 2
 Unacceptable use names of:
─ 12.03
─ Open Office
─ Suite 103
General lighting system
 Lighting to illuminate the
workstation areas of the tenancy
 May include “base building” and
“fit-out” fittings
 Not desk-top task lighting
 Feature lighting is captured under
some assessment methodologies
Both are part of the
general lighting
system
General lighting system
 Do not assess the quality
of luminaires
─ Poor optics
─ Dirty / old
─ Failed lamps
 Do not assess the quantity
of light
─ Low lux levels
─ Dark areas
General lighting system - example
 Included
Both are part of the
general lighting system
─ Troffers
─ Up lights
 Excluded
─ Exit lights
─ Emergency lights
Exit
lights
are
excluded
General lighting system identification
Yes
No
Yes
Group exercise – identify the general
lighting system
 Work in a group, identify the general lighting system from
the photos and plans downloaded
 You have 15 minutes
General lighting system exercise 1
General lighting system exercise 2
General lighting system exercise 3
General lighting system exercise 3a
General lighting system exercise 4
1200x600 grid
General lighting exercise 5
1200x600 grid
Nominal Lighting Power Density
 NLPD
─ Applies to general lighting system only
─ Dependent on luminaire power, number of luminaires and area

─ The possible assessment methods are
 Grid based
 Aggregate methods (contains 3 options )
 Typical range 6 – 20 W/m2
─ Most buildings in 8 – 15 W/m2 range
Nominal Lighting Power Density
 Five categories:
─
─
─
─
─
“Very poor” >18.1W/m²
“Poor” 15.1-18W/m²
“Median” 10.1-15W/m²
“Good” 7.1-10.0W/m²
“Excellent” <7W/m²
Identifying luminaires
 Definition of terms
 Luminaire naming
conventions
 Counting lamps
 Determining nominal
lamp power
Luminaire naming conventions
 Suggested option
─ XXabb
 XX is a luminaire body code (2 or more letters)
 a is the number of lamps (single digit number)
 bb is the nominal power of each lamp - typically 2 digits but may be 3 or more
─ If you need more information, precede with a plus sign
 RT236 is a 2x36W recessed troffer
 RT236 + LVR for louvred diffuser
 More examples are provided in the TLA Rules
Counting lamps
 Ideally physically sight the lamps
 Other options available in TLA
Rules version 3
 Diffusers and reflectors can give
misleading lamp images
 Luminaire on the right has a
single T8 lamp
Determining lamp power
 Ideally physically sight the lamp
power label
 Replacement lamp stocks or
installed equipment lists
 Where unsafe to inspect
luminaires use default lamp
options in TLA Rules version 3
Luminaire control gear fundamentals
 Identifying ballast types
 Identifying transformer types
 Determining luminaire power
Identifying Ballast Types
 Using the ballast
discriminator
 T5 – electronic only
 Looking up lamp model
 Inspecting lamp connection
Identifying Transformer Types
 Visual inspection
─
Magnetic – larger, heavier
─
Smaller – details written on
transformer
─
Use of ballast discriminator is not
permitted for ELV halogen lamps,
too unreliable
Total luminaire power

Standardised figures only – NLP may differ from actual power
NLP = nominal lamp power
Total luminaire power

Standardised figures only – NLP may differ from actual power
Other luminaire cases
 Voltage reduction devices, dimmers:
─ Assess as if no voltage reduction device or dimmer present
 T5 adapters
─ Assess as per T5 lamp of same type
 If still not covered:
─ Directly measure luminaire power or take from nameplate
─ Ensure safe work methods are followed
─ Engage specialist trades person if required
Luminaire defaults
 Where inspection not possible, defaults may be used
 These are conservative figures
 Table 2 in TLA Rules version 3 (page 31)
T5 adapters
LED fittings
Luminaires – Documentation Requirements
 Photos of each luminaire depicting lamp type, lamp
power, number of lamps and control gear
AND/OR
 As installed equipment lists or replacement lamp photos
AND/OR
 Results of individual luminaire power tests
OK for # lamps
X
Not OK for lamp W
OK for # lamps
X
Not OK for lamp W
OK for lamp W
X
OK for grid
X
Group activity– identifying and naming
luminaires
 Identify and name the luminaires shown in each
of the photographs provided
 Try to identify
─
Luminaire type
─
Lamp power
─
Control gear type
─
Any additional information needed to work out total luminaire
power
Luminaire identification 1
Dimensions
1.2m x 0.3m
T5 lamp
ANSWER
•
Recessed T5 troffer,
•
Can’t tell the power
without checking the
lamp label
•
Could be 28W (T5 HE)
or 54W (T5 HO)
Luminaire identification 2
ANSWER
•
Recessed T8 troffer,
•
Can’t tell the power
without checking the
lamp label
•
Must use ballast
discriminator to check
control gear type
Luminaire identification 3
ANSWER
•
CFL Downlight
•
2 lamps
•
Lamp power is 13W
•
Control gear – need to
check with ballast
discriminator (or look up
lamp model – this one
is magnetic)
Luminaire identification 4
ANSWER
•
Halogen downlight
•
Can’t tell lamp power
from photo, could be
20W, 35W or 50W
•
Visual inspection to find
control gear type
•
If unsafe to inspect –
assume 50W lamp with
magnetic transformer
Luminaire type evidence
Visual inspection of the luminaires
Photographs of the system components
─ Lamps
─ Evidence of ballast/transformer type
─ Overall luminaire
Installed equipment lists
Replacement lamp stocks
Luminaires
Any questions on luminaire identification?
Assessing NLPD
Four methods
Grid method – works for open plan with
regular grid
3 Aggregate methods – increasingly flexible
methods for sites that are more complex
Assessing NLPD
When is a Functional Space assessable?
A functional space is assessable if:
─ It contains >50m² of qualifying office space AND
─ Qualifying office space is >15% of area AND
─ There is an existing or proposed lighting system for these
areas
Qualifying office space = space for
workstations or desks
─ Excludes meeting rooms, reception areas, function rooms,
toilets, kitchens, storage and utility, 2-walled corridors
Cell office - OK
Aggregate Method 2 - suitable space
Cell
office
- OK
Open
plan OK
Server room
– NO
Building Core –
NO
Cell office
- OK
Resource
room – NO
Corridors – not OK
Cell office - OK
Tea room –
NO
Meeting rooms, etc
NO
Non-Assessable functional space
documentation requirements
Lack of open office space
No existing or proposed lighting system
Police or Security operations
Section 2.4.2 of TLA Rules version 3
Grid method of assessment
 Permitted when
─ Simple repeating block consisting of up to two
luminaires covering open plan area of at least 50% of
the space area or 250m², whichever is smaller; AND
─ Less than 5% (by wattage) deviation from the repeated
block; AND
─ Documentation requirements for grid method can be
met
Grid method of assessment
 Use for regular
arrays
0.6m
 Identifying the
array
 Measure the grid
spacing
─ Need actual
measurement of
tile size – don’t
assume
1.2m
2 tiles
4 tiles
Grid spacing
400
1200
1350
450
Grid spacing
 Look for repeating
patterns
 In this example, assume
a 1200x600 grid tile
 Alternate spacing 2400
and 1800
 Average 2400x2100
spacing
Grid spacing
 Staggered array
 Area per luminaire
Grid spacing
 Another staggered array
 Do not be confused
─ Look for the symmetry
Grid Method Documentation Requirements
 Reflected ceiling plan (Plan/mock up/photo)
demonstrating grid; AND
 Plan/mock up showing that the minimum coverage
requirement is met; AND
 Photos/site notes/drawings showing that nonstandard fittings < 5% watts across open plan; AND
 Photos/site notes identifying qualifying luminaire
types in grid
Grid Method - suitable space
 Repeating
block:
─ >50% functional
space area
─ >250m²
 <5% of
luminaires in
open plan not
same as main
luminaire
Grid Method - unsuitable space
 Perimeter
luminaire>5%
by wattage
Aggregate Method 1 – Open Space
 Permitted when
─ There is open plan area of at least 50% of the space
area or 250m², whichever is smaller; AND
─ Documentation requirements for Aggregate Method 1
can be met
 Use for most irregular or multi luminaire
configurations where there is enough open plan
Aggregate Method 1
Identify an open plan space that:
─ Is either>50% of space area or>250m², whichever is
smaller
─ Contains all the luminaire types used in the open plan area
in a similar proportion to the open plan area as a whole
OR, if no such space available
─ Use the whole open plan qualifying office space
Aggregate Method 1
 Prepare drawing of sample space
 Calculate sample space area better than 5%
accuracy
 Count all luminaires in sample space
 Enter data into spreadsheet
Aggregate Methods Documentation
Requirements
 RCP/site notes/photos demonstrating irregularity of
layout; AND
 Plan/mock up showing aggregate method sample
space; AND
 Photos/site notes identifying all qualifying luminaire
types in sample space; AND
 Site notes count of all luminaires within aggregate
method sample space (locations not required)
Example: Mix of luminaires
 Open plan space
 Two different luminaires
 No regular spacing
 Aggregate method 1
suitable provided
documentation
requirements can be
met
Aggregate Method 1 - suitable space
 Sample space:
─ Open plan
─ >250m² (316m²)
─ Representative
mix of luminaires
Aggregate Method 1 - unsuitable space
 Includes nonopen plan area
X
Aggregate Method 1 - unsuitable space
 Does not
include
representative
sample of
luminaires
X
Aggregate Method 1 - unsuitable space
 Too small
─ <250m²
96m²
Aggregate Method 2 – Open space + cell offices
 Permitted when
─ There is qualifying office space (open plan + cell offices)
of at least 50% of the space area or 250m², whichever is
smaller; AND
─ Documentation requirements for Aggregate Method 2
can be met
 Use where there is no repeating grid and
inadequate open office space for Aggregate
Method 1
Aggregate Method 2
Identify a qualifying office space made up of
open plan and cell offices that:
─ Is either>50% of space area or>250m², whichever is
smaller
─ Contains all the luminaire types used in the open plan area
in a similar proportion to the open plan area as a whole
OR, if no such space available
─ Use the whole qualifying office space
Aggregate Method 2
 Prepare drawing of sample space
 Calculate sample space area better than 5%
accuracy
 Count all luminaires in sample space
 Enter data into spreadsheet
Aggregate Methods Documentation
Requirements
 RCP/site notes/photos demonstrating irregularity of
layout; AND
 Plan/mock up showing aggregate method sample
space; AND
 Photos/site notes identifying all qualifying luminaire
types in sample space; AND
 Site notes count of all luminaires within aggregate
method sample space (locations not required)
Aggregate Method 2 - suitable space
115m²
Open plan space <250m²
and <50% - too small for
Aggregate Methodaggregate method 1
2 – sample spaces
286m² - OK
Aggregate Method 2 - suitable space
Aggregate Method
2 – sample spaces
386m² - OK
Aggregate Method 2 - suitable space
Aggregate Method
2 – sample spaces
Aggregate Method 2 - suitable space
179m²
- too
small
Aggregate Method
2 – sample spaces
Aggregate Method 2 - suitable space
294m² OK
Aggregate Method
2 – sample spaces
Aggregate Method 3 – Entire Functional Space
 Permitted when
─ Space cannot be assessed under Grid Method,
Aggregate Method 1 or Aggregate Method 2; OR
─ Space is under 250m² or for spaces larger than 250m²
where the grid method is not appropriate
 Use for small functional spaces or where the
documentation is too poor to meet requirements
for the other methods.
Aggregate Method 3
 Identify area of Functional Space to 5% accuracy
 Count all luminaires in sample space (GLS and nonGLS)
 Enter data into spreadsheet
Aggregate Methods Documentation
Requirements
 RCP/site notes/photos demonstrating irregularity of
layout; AND
 Plan/mock up showing aggregate method sample
space; AND
 Photos/site notes identifying all luminaire types in
sample space; AND
 Site notes count of all luminaires within aggregate
method sample space (locations not required)
Grid and Aggregate Methods exercise 1
 How would you
assess this
space?
 Tenancy is a
single open
office area of
240m²
Grid and Aggregate Methods exercise 2
 How
would
you
assess
this
space?
Grid and aggregate method assessment
Any questions on grid or aggregate method
assessment?
Lighting control assessment
 Assessed as “control
capacity”
 Assess only the control
system’s capacity to
deliver outcomes
 No assumptions on how
well it is actually
working
Lighting controls
Control capacity assessed as Good, Moderate
or Poor
Look at the main control system for the space
Two factors to consider
─ Switching zone size
─ Control strategy
Control strategy
 Three basic control
strategies to assess
─ Manual
─ Time based
─ Occupancy based
Occupancy sensors
Occupancy control
─ Luminaires on supervisory control with occupancy sensors
available
─ Luminaires hardwired to occupancy sensors
─ Luminaires with occupancy sensor and timer control
Timer Control
Timer control
─ Luminaire connected to a supervisory control system
─ Luminaire controlled by time switch
─ Luminaire interlinked to turn off when security alarm set
Manual Control
Manual control
─ Anything which doesn’t meet the requirements of timer or
occupancy sensor control
Bell press switch is not sufficient
evidence of a timer control
system
Daylight sensors
Not included in control grading
May be integrated into occupancy sensors
Control Type Flow Chart
Control Technology Documentation
Presence of occupancy control
─ Photos/docs for sensors AND
─ Drawing/mock up of sensor locations OR count of sensors
─ Presence of integrated sensors
Presence of supervisory control
─ Manuals, photo of interface, controllers, switch type
Presence of time switch
─ Manuals, photos, drawings
Control Technology Documentation
Sketch or commentary reasonably
demonstrating coverage of the
occupancy/timer system is greater than 50%
Can’t document it?
─ Then you can’t claim that level of control
─ Try the level below
Switching zone size
Two switching zone sizes to assess
─ Up to 100m²
─ Over 100m²
Assessment is based on the largest switching
zone in the functional space
See examples in TLA Rules version 3
Control Capacity
Control Zone Documentation
Lighting control zone area documentation
─ Only required for spaces claiming occupancy control
─ Marked up scale drawing showing fittings, control zones
and area of each control zone
Functional space area documentation
─ Only required for manual space control spaces under
250m²
Switching size example
Sensors
marked in red
All areas are
controlled by
the occupancy
sensors
Ceiling tile is
1.2m x 0.4m
Switching size example
Case 1 – motion
on any sensor
turns all the
lights on
Switching zone
size is >100m2
Control capacity
is “moderate”
Switching size example
Case 2 – motion
sensors control
local area only
Largest
switching zone
size is <100m2
Control capacity
= “good”
Effect of switching zone size
Small switching
zone (50m²)
Large switching
zone (2,000m²)
Control Capacity
Any questions on control capacity
identification?
Proposed systems
Lighting system is to be upgraded within 3
months of the assessment date
Assessments cover both NLPD and control
capacity
Must assess the existing system too
─ Proposed systems are not a substitute for an existing
system assessment
Proposed system assessments are optional
Assessment of proposed system
May arise from contractual commitment to
upgrade lighting system
─ Owner proposed lighting upgrade
─ Make good provision
Must be contracted with an agreed completion
date within 3 months of assessment date
Contract must be sighted by assessor
─ Retain copy of contract or relevant pages as evidence
Assessment of proposed system
Must be fully documented
─ Luminaire selections complete
─ Control strategy clearly set out
─ Control equipment selected
Assess existing and proposed
Difficult Buildings
Exemptions for Buildings
Denial of access or information to complete
ratings (see section 3.3.2)
Non-Assessable spaces for the TLA
component (see section 2.4)
Exemptions from Disclosure Obligations
A building may apply for an exemption if:
─ It is used for police or security operations; or
─ It can’t be assessed due to the characteristics of the
building or area of the building.
Submission of exemption application does not
allow marketing or negotiation of the property
until the exemption is granted.
Exemption - Process
Police or security operations
─ Gather details on the nature of operations within the
building
─ Seek exemption from the Department under BEED Act
Clause 17 (3) (a)
─ Note: Security is generally interpreted as being national as
opposed to corporate or commercial security
• Provide detailed reasons in the application form why
exemption is required
• Exemptions are provided at the discretion of the Department
Exemption - Process
Non assessable Building
─ Gather detailed evidence demonstrating why building is not
assessable, e.g.
 Detailed reasons why rating can’t be completed
 Any statement from NABERS indicating a rating can’t be provided
─ Seek exemption from Department of Industry under clause
17(3)(b)
─ Record details on application form specifically identifying
reasons why building is not assessable
Access Denial - Process
If a tenant/owner refuses access or information
─ Assessors should try a more senior representative and
document attempts to collection information
─ Contact CBD team for assistance
─ CBD administrator may issue a s18 request letter
─ If an owner or lessee still refuses access or information after a
s18 request letter, they must apply for an exemption under
clause 18(7).
 If access or information is refused without an exemption, this is a
breach of a civil penalty provision. Penalties apply.
Where a functional space does not allow a
TLA Assessment
 An assessment may not be possible because
space is:
─ Under refurbishment
 No lighting system in place; or
 Lighting system is incomplete (luminaires missing)
─ Non office fit-out
 Extensively fitted out with small cellular offices, meeting rooms or
conference rooms
Where a space does not qualify for an
exemption
Assessor needs to include the space in the
assessment form
Mark the space as not assessable on the FS
tab
Provide a reason why the space was not
assessable
─ Include a reference to the clause in the rules used to
determine the space as not assessable
Difficult Buildings
Any questions on exemptions, non-assessable
spaces or denial of access?
Contact the CBD team when in doubt!
Topic 3
The Assessor Portal Online Form
and Single BEEC Application process
The Assessor Portal Online Form
Online form
Contains all information used in assessments
Submit assessments through Portal
Can pre-fill and save parts before going to site
Downloadable PDF Summaries
The Single step BEEC ApplicationComplete whole BEEC process in one
application, TLA and NABERS combined.
Tracking of applications.
Increased validations to minimise returns for
incorrect data.
CBD Assessor Portal User Manual.
The Online TLA Component
Building Overview
Luminaires
Functional Spaces
Individual area assessment details
Summary
Typical assessment workflow
Site
information
• Owner details
• Assessor details
Areas to be
assessed
• All functional spaces
• Space sizes
Luminaires
used
• Lamp types
• Lamp power
• Number of lamps
Functional
space
assessments
• NLPD
• Controls
• Proposed systems
Site information
Building owner details
Site contact details
Assessor details
Rules and assessment form versions
Other comments and/or assumptions
Luminaires
 All luminaires used in
assessment
 Can’t modify luminaire names
─ Delete and recreate if necessary
 Add luminaires via button click
 Delete luminaires via button click
only
─ Can’t delete if in use
Functional spaces
Data entered to automatically generate
description for BEEC
Add new/delete unused spaces via button
click
Quickly navigate to space forms
Do not include tenant names
Functional space details
NLPD
Control capacity
Performance
comments
Proposed systems
Grid based method
Block info
─ Luminaire type,
─ Quantity
─ X Spacing (must be in metres)
─ Y Spacing (must be in metres)
─ Non-standard luminaires
─ Standard luminaires
Aggregate methods
Count and type of all luminaires
─ Each luminaire type needs a new line in the table
Total size of aggregate area (m²)
Control capacity
Start with control system type
Boxes requiring information will become
visible
Automatically grades controls based on inputs
Evidence
 Describe documentation gathered for functional
space
 All evidence fields that are present
must be completed
Proposed system
Details recorded on the functional spaces page
Click on “Add / remove proposed system”
Proposed system
Assess NLPD and
control capacity
No performance
comments
Summary tab
Review the information
Automated data completion check
Automatic submission to CBD administrator
Two downloadable summaries, one with all
the data entered and a second to check that
the main details are correct which will appear
on the final BEEC.
Topic 4
Next Steps and Further Information
Next steps
Complete the on-line CBD training module
Successfully complete the examination
─ Exam will be sent to you within two weeks
Apply for accreditation within 6 months
─ $394 fee
Any questions?
Further information
www.cbd.gov.au;
[email protected]
Tel 1800 020 131
Disclaimer
This presentation is intended to provide a summary about the Commercial Building Disclosure Program. The Program may be
subject to change without notice. Readers should not act on the basis of the information provided in this presentation but should
instead obtain legal advice.
Readers wanting further information may refer to the Program’s website.
While reasonable efforts have been made to ensure that the contents of this presentation are factually correct, the Australian
Government does not accept responsibility for the accuracy or completeness of the contents, and shall not be liable for any loss
or damage that may be occasioned directly or indirectly through the use of, or reliance on, this presentation.