Transcript SQ40i (Individual Sequin Device)

SQ40i (individual Sequin Device)
SQ40i (Individual Sequin Device)
Check List
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i (Check Sheet)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Machine model confirmation· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
1. Write down SQ40i Model No. and S/N.
YES
NO
Model No. :
S/N :
Install date :
Technicain :
Note :
★ If you finish all Checks, click the right button to go back to install page.
-1-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i (Check Sheet)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
1. Are quantity and quality of SQ40i OK?
◆ L-Type :
EA, R-Type :
YES
NO
EA
<NOTE>
2. Are quantity of the boards for SQ40i prepared properly?
◆ SQ B/D :
EA,
Control B/D :
EA
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
-2-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i (Check Sheet)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
3. Do you prepare all cables for SQ40i?
YES
NO
① Sub control board <-> SQ board connect
② SQ board power cable
③ Control board ↔ SQ board can communication cable
④ Encoder branch cable
⑤ Can communication branch cable
⑥ SQ board ↔ Air pressure Sol. power cable
⑦ Air pressure Error detection cable
⑧ SQ device connecting cable
<NOTE>
★ If you finish all Checks, click the right button to check next check point.
-3-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i (Check Sheet)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Confirmation of parts · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
4. Do you prepare the parts of air pressure for SQ40i?
YES
NO
① Nipple(KQ2T06-04) and Nipple for branch (KQ2t06-00)
② Black and invisible tubes
③ Air pressure Sol.
④ Filter regulator and air pressure Sol. connecting hose
<NOTE>
5. Do you prepare tools and jigs for installation?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
-4-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
1.
YES
NO
Did you use water hose and level gauge when adjusting level?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
-5-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
····
2. Do you confirm important check point of SQ40i(Assy)?
YES
NO
① Do you check state of bolt screwing and scratch and chopping?
② Is there no jamming of wheel bracket working?
③ Is there no jamming of driving lever pin working?
④ Is the cutting of spangles good?
⑤ Do you check lock-tight on the SQ base supply guide plate screws(M3 X L6)
⑥ Is there no jamming on lifting slide moving?
⑦ Is there no jamming when you screw ball screw by hands?
⑧ Is the state of motor cable connecting good?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
-6-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES
NO
3. Did you attach jumper pin(Ended resistor) on the control board and SQ board of
the last head?
① Is a jumper(ended resistor) pin attached only on SQ board of the last head?
② Are the control board and SQ board proper with specification of machine?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
-7-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES
NO
4. Is cables of control B/D and SQ B/D connected properly?
① Is there no missing cables?
② Is there no bad/wrong connection?
<특이사항>
★ If you finish all Checks, click the right button to go back to install page.
-8-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES
NO
5. Did you check in all check list of air pressure progress?
① Did you check nipple assembling and plug inserting to nipple of the first
and last heads?
② Is the air pressure hose connected to nipple completely?
③ Did you check air pressure of Sol. and filter regulator with no missing?
<특이사항>
★ If you finish all Checks, click the right button to go back to install page.
-9-
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
· · 6.
· Did you check in all the check list of attaching device and lifting damage
YES
NO
absorbing?
① Is the needlebars and needles of SQ40i proper specification?
② Did you check level and close of SQ supply base and setting Jig?
③ Did you check close of front, side, under of Jig and SQ supply base?
④ Did you check damage absorbing of Lifting?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
- 10 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
YES
NO
7. Did you check in all check list of motor synchronization and quantity of SQ
supping?
① Did you check lamp(ON) of potentiometer?
② Did you check close with Jig?
③ Is there no interval between supply lever and motor driving lever?
④ Did you check if SQ(spangle) cut is on the center?
⑤ Is there no jamming when Move Motor test?
⑥ Did you check returning to origin when origin function?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
- 11 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
8-1. Did you check all check list of SQ40i?
YES
NO
① Was the guide attached as proper size?
② Does it matched SQ supply lever”B1” and standard pin hole of SQ base?
③ Is there no interval between SQ supply lever”B1”,”B2” and motor driving
lever roller?
④ Is there no jamming when front, rear SQ supply and output,
do front, rear SQ output in a line(straightly)?
⑤ When you pull spangles, are the spangles pulled?
⑥ Does the cut point of front, rear sequin correct?
⑦ Are there no jamming points when ball screw spins and lifting works?
<NOTE>
★ If you finish all checks, click the right button to check mechanic check point.
- 12 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
8-2. Did you check all check list of SQ40i?
YES
NO
① Do you have SQ Setting Jigs, use correctly when installation?
② Did you set device on the state of air suppied?
③ Did you check close of SQ suppy base with Jig, and level?
④ Did you keep distance 0.5mm ball screw between stopper screw?
⑤ Is there no contacting at needle and SQ cutting mes when needle down?
⑥ Is there no missing parts?
<NOTE>
★ If you finish all checks, click the right button to check electronic check point.
- 13 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
1. Did you check all check list of SQ40i?
YES
NO
① Are the control B/D and SQ B/D proper to install specification?
② Do you check attaching end resistor(jumper pin) and no other end resistors
are on the board except the last head?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
- 14 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Installation method · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
9. Did you check in all check list of supply guide replacing process?
YES
NO
① Did you check setting state of replaced guide?
② Is there no jamming on supply lever working?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
- 15 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
SQ40i Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
···
8. Was SQ40i set properly to machine specification?
① L-Type
R-Type
Both-Type
YES
NO
Extension
② What size(mm) of spangles?
L : Front
mm, Rear
mm / L : Front
mm, Rear
mm
③ Does the OP.Box setting correct?
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
- 16 -
Sunstar Precision Co.,Ltd.
SQ40i (individual Sequin Device)
SQ40i Installation (Moving picture)
Characters
Confirmation
of parts
Installation
Check Point
Trouble-Shooting
Trouble - Shooting · · · · · · · · · · · · · · ·· · · · · · · · · · · · · · · · · · · · · · · · · ·
···
1. Is there any strange symptom?
YES
NO
(When there is strange symptom, write down about the symptom in detail.)
<NOTE>
★ If you finish all Checks, click the right button to go back to install page.
- 17 -
Sunstar Precision Co.,Ltd.