Transcript Pen Hardware Requirements and HLK Setup

HLK Pen Validation
Blue Lan
Software Engineer
Partner Enablement, OSG
OPERATING SYSTEMS GROUP
Agenda
 Windows 10 Requirements for Pen
 Test Prerequisite
 Windows 10 Hardware Lab Kit (HLK) Setup
 Co-engineered Assistive Testing Jigs for Pen hardware
 Running standalone test tool on pen devices
 FAQ
OPERATING SYSTEMS GROUP
Windows 10 Pen Hardware Requirements
OPERATING SYSTEMS GROUP
Windows 10 Pen Hardware Requirements
OPERATING SYSTEMS GROUP
General Testing Guidelines

Always have AC power when performing HLK tests

Unless otherwise specified, all numbers in error messages which report distance or location
are in himetric (0.01mm)

Unless otherwise specified, the pen holder should be held at an angle of 90 degrees i.e.
placed vertically against the screen.

Ensure the device is lying flat on the PT3 or RA tool.

Ensure screen resolution is adjusted to the device’s default or highest resolution.

Ensure the device’s orientation matches the orientation of the digitizer and the HLK
application is full screen.
OPERATING SYSTEMS GROUP
Pen HLK Tests
 Pen Hardware Lab Kit has a full set of tests to validate our pen requirements
 Pen tests follow a similar process to our Touch/Precision Touchpad testing
 New tests to exercise the unique features of active pen devices, like pressure and
hover
OPERATING SYSTEMS GROUP
Download Latest Playlist From Hardware Dev Center
 Download Playlist:
 https://sysdev.microsoft.com/en-US/Hardware/compatibilityplaylists/
OPERATING SYSTEMS GROUP
Load Playlist To Remove Unwanted Auto. Tests
OPERATING SYSTEMS GROUP
Download And Installed the Latest Filters
 Download Filters from:

https://msdn.microsoft.com/en-us/library/windows/hardware/hh998024.aspx?f=255&MSPPError=-2147217396
OPERATING SYSTEMS GROUP
Selection Tab, HLK Studio
OPERATING SYSTEMS GROUP
Pen Test Items
OPERATING SYSTEMS GROUP