Transcript PowerPoint-presentation

AutoPOL Unfolder for Windows
Extended unfolding capability for SolidWorks
Import or design a 3D model in
SolidWorks. Any commands can be
used to create features.
It’s not limited to particular sheet
metal features, also surface
models can be unfolded.
Retrieve active part
from SolidWorks into
AutoPOL Unfolder or
import STEP or ACISSAT files.
The AutoPOL command
”Split face” can be used to divide
surfaces. This is done because this
particular part will be manufactured
in two pieces and welded together.
Activate AutoPOL ”Unfold”
command. Select the surfaces to
unfold and click to start the
automatic unfolding calculation.
Optional number of bend
lines can be included.
The 2D flat pattern is created and
shown in a separate windows.
Send 2D flat pattern
back to SolidWorks.
The result is inserted in a
SolidWorks drawing. Notice that
information about bending angles
are included. SolidWorks
dimensioning and annotation
tools can now be used to
complete the drawing.
The output is controlled from a
dialog box. Different settings can be
made and used, depending of how
the result is used in the
manufacturing process.
This slide shows how 2D flat pattern
has been imported into a bend
simulation software. Here the bend
lines and angles are essential.
This slide shows 2D geometry nested
on a sheet. In this case only the
contour is allowed. No bend lines or
angles are included.
Lofted surface.
This and the next slides
shows different kinds of
geometry’s that can be
unfolded. AutoPOL Unfolder
has a very powerful unfolding
capability. All single curved
surfaces can be unfolded.
Several unfoldings created
from a single body 3D model.
Unfolding created from a 3D model
that has some geometrical errors.
NURBS surface.
Bend radius missing.
Inner and outer bend radius has
different center points.
AutoPOL Unfolder for Windows
More information at www.autopol.com