Transcript MEF - Net-Energy.us

M.E.F.
Mechanical Energy Factory
Mechanical Power Converter &
Re-Generator System
Mechanical Power Converter
& Re-Generator System
Mechanical Energy Factory
30 Megawatt Facility
From left to right:
Amusement
Operator Center, Warehouse/storage, 5 System steel buildings,
3 Battery
Storage, Transformer steel building and grid interconnection
with Rides
Mechanical
transformers.
Concept
TYPE OF CONVERSIONS
POWER CONVERSIONS
AC – AC
460 V to 1,140 V, 2MW to 6MW
AC – DC
460 V to 1,140 V, 2MW to 6MW
DC – DC
460 V to 1,140 V, 2MW to 6MW
DC – AC
460 V to 1,140 V, 2MW to 6MW
MECHANICAL POWER CONVERTER
& RE-GENERATOR SYSTEM
(MEF™) Consist of:
AC Drives
Transformers
Steel Frame
Motors
Driven - Rotor / Flywheel
Driver - Lower Wheel
Permanent Magnet Generator
Gearbox – Speed Reducers
Mounted Bearings
Radiator (cooling system)
Water Tank - Water pump
MEF SYSTEM DIMENSIONS
Dimensions: Length 46'-0” ft. x Width 15'-0” ft. x Height 19'-0” ft.
Components
The concept of force is one of the foundations of
mechanics and is closely tied to the concept of motion
and the principle of inertia.
How it works?
By applying:
Torque,
Lever Arm,
Speed and Weight.
Uniform Acceleration
is accomplished by the
Driver Lower Wheel
that are driven by two
800 hp motors.
AC Drive provide support for
multiple built-in safety functions
including:
- Safe Stop
- Zero speed monitoring
- Safe limited speed
- Safe maximum speed
- Safe direction monitoring
- Door monitoring and control
- Enabling switch control
- Safe Max Accel monitoring
- Torque control monitoring
- Voltage control monitoring
Ethernet port allows to easily
configure, control and collect
drive data, can be programmed
to monitor the run time hours for
machine or motor bearings,
giving an advanced notification
to help prevent unplanned
downtime
ELECTRICAL LAYOUT
POWER DUPLICATION
Power can be duplicated by adding additional MEF™.
Power can be duplicated by adding additional MEF™ units.
Re-Generate the electricity necessary to operate your business and help you
increase productivity, reduce costs and improve reliability.
Key Points
Clean Power / No Fossil Fuel, Reduce Emissions
 Sustainable, Reliable
 Cost Effective
 Low Operating Cost
 Low Maintenance Cost
 Decouple generation and load
 Increase asset efficiency and utilization
 Provide versatile, continuous-use asset that generates revenue
 Ease transmission constraints
 Mitigate intermittency "Firming" of renewables
 Provide greater ramp rate control
 Supports Renewable Portfolio Standards (RPS) targets
 Provide ancillary services
 Improve fast-response frequency regulation and balance load at a
lower cost

The system is a real Mechanical Energy Factory!
Mechanical Power
Converter &
Re-Generator System
COMPLETE
MECHANICAL
ENERGY STORAGE
SOLUTION
Battery Storage
Thank You!