Transcript Document

Laszlo Gyorgypal (short bio)
I have almost 20 years experience in the components and devices used in industrial control,
instrumentation and automation applications. Before I came to Altech I worked as a Lead
Application Engineer and business manager in Europe with same or similar product lines.
I have been with Altech since 1998 when I started as an Assistant Product Manager but
shortly I was promoted and became the first Quality Assurance Manager and Management
Representative. In the past 8 years in addition to the quality I had many additional
assignments such as product design (custom foot switch design), engineering drawings and
documentation, prototype creation and assembly manager just to name a few.
I have a Mechanical Engineering degree from a leading European University and a Business
Administration degree, major in Business Management.
As of today, In addition to being a Product Manager I am still involved with various
management functions, quality assurance, engineering projects, CAD system, product
development, assembly and testing of various products.
I’m responsible for the Power supply product line, Interface products, European Fuses,
22/30 mm Push buttons and also the power semiconductor line.
Interface Modules
2007
Laszlo Gyorgypal
Product Manager
35 Royal Road
Flemington, NJ
908-806-9400
www.altechcorp.com
Types of Modules
Sub-D Connector
to Wire Connection
•Provides interface between high density
(Sub D) connectors and discrete wires.
•Up to 50 poles
•SD Female connector to wire
•SD Male connector to wire
•Panel Mount or DIN Rail Mount
Ribbon Cable Connector
to Wire Connection
•Provides interface between IDC
Connectors and discrete wires
•Up to 64 poles
•Panel Mount or DIN Rail Mount
•Double sided PCB board with
Components Solder Pads
Types of Modules
Component Carriers
Diode Module
•Use component carrier to modify and/or build circuits
for special requirements
•Double sided board with plated through holes
•Double sided board with installed solder posts
•Panel Mount or DIN Rail Mount options available
•Wires individual labeled Diodes
into existing circuits for freewheeling,
DC inductive kick suppression,
Reverse DC polarity
•Panel Mount or DIN Rail Mount
•Special configuration available
•Series connection, bussed anodes
or bussed cathodes
•Built with 1A or 3A diode
Types of Modules
Dip Socket Carriers
•Interface module with Dual In-Line
Package (DIP) Socket Carrier
•Available in 14, 16 and 20 Pins
•Panel Mount or DIN Rail Mount
•Components Solder Pads
Voltage regulator
•Provides well-regulated output
voltage from an unregulated source
•Output voltage: 1.2 to 33 V
•2A output current
•Included 2 Amp fuse
Monitoring/Protection Modules
Indicator Module
•Monitor Control functions and
sequences
•Furnished with 7 LEDs
•Available for input voltages from
5 to 60V DC
•Panel Mount or DIN Rail Mount
Surge Suppressor Module
•Protects personnel and equipment
from over voltage, spikes and
damaging voltage surges
•Panel Mount or DIN Rail Mount
Fuse Modules
•Protects circuits from overload
and short circuits
•Available with 3 or 6 vertical fuse
holders
•Panel Mount or DIN Rail Mount
Realy Modules
Relay Modules
and Carriers
•1, 2, 4, 8, 16 channel available
•12, 24V DC and 110, 220V AC
available
•LED coil voltage indicator
•Panel Mount or DIN Rail Mount
•Current rating: 10A per channel
Bussed Channels
•8, 16 channel available
•12, 24V DC and 110, 220 VAC
available
•LED coil voltage indicator
•Panel Mount or DIN Rail Mount
•Current rating: 2x8A per channel
High Current
•5, 6, 12, 24, 48, 60, 110V DC and
6, 12, 24, 50, 110, 220, 240V AC
available
•LED coil voltage indicator
•Panel Mount or DIN Rail Mount
•Current rating: 15A per channel
Types of Modules
I/O Opto Carrier
•1, 2, 4, 8, 16 channel available
•Isolated or bussed channels
•Input or output , AC or DC
•Integrated Socket
•LED indication, fuse protection
•Panel Mount or DIN Rail Mount
•Current rating: 3A
Solid State Relay
I/O Module
•1, 2, 4, 8, 16 channel available
•Fuse protection
•LED indicator
•Panel Mount or DIN Rail Mount
•Input or output modules can be mixed
•Wide range of solid state I/O modules
to choose from
Safety Relay Modules
•LED coil voltage indicator
•Panel Mount or DIN Rail Mount
•Reverse DC polarity LED protection
•Surge suppression with DC coils
•Industry standard safety relays
•Double pole double throw relays
•Single or bussed channels
Interface Relays
Interface relay
I1 series
•Slim line, only 6.2 mm
•Build in relay
•LED coil voltage indicator
•DIN Rail Mount
•6A single pole double throw
•20pole jumper links available
General Purpose
M and L series
•Narrow design
•Pluggable relay with clip
•Mechanical and/or LED indicator
•DIN Rail Mount socket
•5A DPDT or 4PDT (M series)
•12A DPDT (L series)
•Diode module available (M series)
General Purpose
G-Series
•Pluggable relay with clip
•Mechanical and/or LED indicator
•DIN Rail Mount socket
•10A DPDT or 3PDT
Pluggable Slimeline Relays
• Slim size (width 6.2 mm) DIN rail mount, available with or without the plug in relay
• Build in LED indicates the relay energizing stage.
• SPST (form C) configuration relay with a maximum switching current of 6A.
• Available with 5,6,12,24,110,220 V coil configuration
• Accessories (jumpers, spacers, markers) are available.
• Relay Clearance/creepage distance: 8mm
• Coil power consumption: 170mW
• High relay breakdown voltage 4kV (between coil and contacts)
• Relay surge voltage up to 6kV (between coil and contacts)
• Environmental friendly product (RoHS compliant)
Custom Assemblies
• Altech can provide engineering, Circuit Design,
PCB Layout, Prototypes, production
• Customer Support from design to production
• Quick turnaround and competitive solution
• Minimum quantity – 25 pieces
Available documentation