Transcript Infusion

Infusions and decoctions are
liquid medicinal forms
representing water
extractions from medicinal
plant raw material, as well
as aqueous solutions of dry or
liquid extracts (concentrates).
The process of extraction of active substances
from the plant raw material consists of the
following stages:
1) swelling
2) the primary sap formation inside cells
3) mass exchange










The correlation between the amounts of the raw
material and extraction agent;
Standards of the raw material (the quantity of
active substances in the raw material);
The histological structure of the raw material;
The degree of powdering of the raw material;
The material of the apparatuses applied;
Temperature and the infusion time;
The influence of enzymes and the microflora;
The chemical composition of the active substances;
pH of the medium.
1:10
1:20
1:30
1:400
All plants, except strongeffective ones
Althaea root
Valeriana,
Adonis,
Claviceps
purpurea,
Convallaria,
Saponaria
officinalis,
Polemonium
coeruleum,
Polygala
vulgaris
Strong-effective
plants
(Thermopsis, Digitalis, etc.)

Rp.: Infusi herbae Hyperici ex 10,0 - 200 ml
Da. Signa. For rinsing of the mouth’s cavity.
According to the given formula it is necessary to
prepare 200 volumetric parts of the infusion from 10
weighed parts of St. John’s wort herb.

Rp.: Infusi hеrbае Lеоnuri 200 ml
Da. Signa. One tablespoon 3 times a day
In this case it is necessary to prepare 200 volumetric
parts of the infusion from 20 weighed parts of
Leonuri herb.
Conventional coefficients:
 for the roots – 1.5;
 for bark, flowers and herbs- 2.0;
 for seeds – 3.0.
For example, to obtain 200 ml of infusion from
Leonuri herb the amount of water to be taken
should be: 200 + (20.0 × 2) = 240 ml.
Water extraction
Infusion (up to )
From 1 to
Decoction (up to )
From 1 to
Infusions and
decoctions with the
indication “Cito!” in
the prescriptions
Time of
infusion
(the water
bath
temperature)
15 min
25 min
30 min
40 min
25 min
Time of cooling
(the room
temperature)
45 min
45 min
10 min
10 min
artificially
Peculiarities of the infusion formulation
from the raw materials containing alkaloids
(Thermopsis herb, Belladonna herb, Selaginis
herb, Ipecacuanha root, Chinchona bark, etc.).


The raw material is extracted by water
acidified with the hydrochloric acid in the
concentration of 0.83% (the quantity of the
acid should be the same as the amount of
alkaloids in the plant raw material)
The given medicine is the mixture from the plant raw material
containing alkaloids (thermopsin, etc.), belonging to the strongeffective substances, and sodium benzoate readily soluble in
water. The standards of the raw material according to the State
Pharmacopoeia ХI is 1.5 %. It means that
100.0 g of the raw material contains ------------1.5 g of alkaloids
0.5 g
-----------Х g of alkaloids
Х = 0.0075 g of alkaloids

The quantity of the hydrochloric acid solution (1:10) is 0.83 %:
0.83 g of hydrogen chloride ----------------------- 100 ml of the acid
solution
0.0075 g -----------------------------X ml of the acid
solution
Х = 0.9 ml = 18 drops (1 ml - 20 drops).
In the pre-heated porcelain infuser place 0.5 g of the powdered
Thermopsis herb, add 18 drops of 0.83 % of the hydrochloric acid
solution, add 200 ml of the purified water (if the amount of a dry
medicinal raw material is less than 1.0 g; the water absorption
coefficient can be neglected). Infuse for 15 minutes on the boiling
water bath, stirring constantly. Then cool for 45 minutes and filter
in the volumetric cylinder. Press the raw material with the pressstrainer and add water to the required volume through the
pressed raw material. Pour the infusion obtained into the auxiliary
bottle and dissolve 4.0g of sodium benzoate, then filter into the
bottle for dispensing.
WCP (front side)
Date
№ Pr.
Herbae Thermopsidis
0.5
Sol. Acidi hydrochlorici (1:10) gtts XVIII (1 ml-21 drops)
Aquae purificatae
200 ml
Infusi herbae Thermopsidis ad 200 ml
Natrii benzoatis
4.0
V total =200 ml
Prepared by:
(Signature)
Checked by:
(Signature)

The peculiarities of the formulation of infusions from the raw material containing
cardiac glycosides

(Digitalis leaves, Adonis herb, Drimia bulbs, etc.)
1. pН of the medium should be neutral because in the acid and alkaline medium the
cardiac glycosides are splitted to genines
2. Observance of the established degree of powdering the plant raw material
3.A strict observance of the temperature and time regimen of infusion
The peculiarities of the formulation of water extractions from the plant raw material
containing volatile oils
(Valerian roots and rhizomes, mint leaves, Origanum herb, chamomile flowers, etc.)
1. The process of extraction is conducted in infusers tightly closed with covers
2. Filter only after the complete cooling of infusion
The peculiarities of the formulation of water extractions from the plant raw material
containing saponins
(Polygala root, Polemonium root and rhizomes, Glycyrrhiza root, etc.)

Saponins are extracted the most completely in the presence of sodium
hydrocarbonate, which is added calculated by 1.0 g per 10.0 g of the raw
material, but only if it is prescribed in the formula.
Rp.: Infusi radicis Althaeae ex 4.0 - 100 ml
Natrii benzoatis
3.0
Natrii hydrocarbonatis
2.0
Liquoris Ammonii anisati 3 ml
Sirupi simplicis
10 ml
Misce. Da. Signa. One tablespoon 3 times a day.



The mixture from the raw material containing a mucilage
with the substances soluble in water, an aromatic substance
– ammoniac anise drops, which is specific when
introducing, and a viscous liquid –the sugar syrup.
Place 4.8 g of the powdered Althea root in the auxiliary
bottle, add 120 ml of the purified water and infuse at the
room temperature within 30 minutes while stirring
frequently by a glass stick. When the time is over, the
infusion is filtered through a double gauze layer into a
measuring cylinder and without wringing the raw material,
add some water through the raw material to make the
volume to 100 ml. Pour the infusion obtained into the
auxiliary bottle, where at first dissolve 2.0 g of sodium
hydrocarbonate, then add sodium benzoate and filter into
the bottle for dispensing. In a small jar measure 10 ml of a
simple syrup and 3 ml of ammoniac anis drops, stir with a
glass stick while shaking and add the mixture to the
infusion prepared.
Rp.: Infusi radicis Althaeae
ex 10,0
Infusi herbae Leonuri
ex 20.0
Infusi foliorum Farfarae ex 20.0
Decocti corticis Viburni
ex 25.0 - 1000 ml
Misce. Da. Signa. Two tablespoons 4 times a
day.
The amount of water is divided into 3 parts:
for the Althea root infusion: 200 ml  1.3 =260 ml
for the Viburnum bark decoction 250 ml + (25.0 
2) = 300 ml;
for the Leonuri herb and Farfarae leaves infusion:
1000 ml - (260 + 300) + (20.0  2.9) + (20.0  2) =
648 ml
The total volume of the multi-component water
extraction should be:
200 + 250 + 550 = 1000 ml.